Installation guide

ADVANCED MANUAL / bit Ten D /

2. Select Check for Updates; the internet browser installed in your PC

will open and automatically search for the URL:

http://update.audison.eu;

WARNING: You have to manually download the files from the

above website. The method to access the software may differ

from the one described here. Please, always follow the instructions

you find on the website.

3. Once the website page has opened, click on the LINK (red arrow).

4. To access the Download Area where the updated versions of Installation

Guide, Advanced Manual, Software and Firmware are available for

download, you have to enter the word bitten in both the LOGIN

and PASSWORD box.

5. Look for the most updated file showing the word Firmware followed

by four numbers and click its icon to start the download.

When requested, save the file to your PC.

6. Select Update Firmware; the software will ask you to select the file

that you just downloaded from the Download Area or that you previously

saved in your PC.

WARNING: To ensure the Firmware is updated correctly, disconnect,

if any, the terminals for the hands-free kit in use from the bit Ten D

PHONE inputs.

The bit Ten D firmware update procedure requires particular attention.

So, it must be performed under the best possible conditions:

if the firmware update is launched but prematurely interrupted

(for example, because the PC locks up, or a supply voltage drop

occurs to the bit Ten D, or the USB accidentally disconnects

during the update), you may have to reprogram the bit Ten D in Rescue Mode

(see 9.4). In extreme cases, you may have to contact our Customer Service

for further support as bit Ten D reprogramming may be necessary.