User Manual

3
AP F8.9 bit /
USER’S MANUAL
1. PRODUCT DESCRIPTION / PRECAUTIONS
2. PACKAGE CONTENTS
- 2 - 30 A replacement fuse:
- 1.8 m USB cable:
- 2.5 mm hex key:
- 4 - 4.2 x 50 mm self-tapping, cross head mounting screws:
- AP F8.9 bit amplifier
- CD ROM containing:
AP F8.9 bit Software
This owner’s manual (.pdf)
Audio Test Tracks
30
A
30
A
AP F8.9 bit is a 9-channel amplifier with 8 amplified channels settable in bridge mode; it also features a 32 bit,
147 MHz clock speed, 24 bit AD/DA converter digital sound processor (DSP), essential to maximize the acoustic
performance of your car audio system.
It can be interfaced with any factory system, even on cars with built-in audio processors, since with the de-equalization
function, AP F8.9 bit will send back a linear signal.
It features 13 signal inputs, 6 Hi-Level, 6 Pre-In and 1 S/PDIF optical digital and provides 8 amplified power outputs
and 1 pre-amplified that is optimized to drive a subwoofer.
Each output channel provides: graphically adjustable parametric equalization group, 68-frequency steps electronic
crossover and BUTTERWORTH or LINKWITZ filters with 6-24 dB slopes and a digital time delay line.
The user can make adjustments that allow him or her to interact with the AP F8.9 bit through the DRC MP remote
control device.
WARNING: 1. A PC provided with Windows Vista, Windows 7 or Windows 8 operating system, 1.5 GHz minimum processor
speed, 2 GB RAM minimum memory and a 1024 x 600 pixels minimum resolution graphics card as well as at
least 1 GB of available hard-disk space are required to install the software and setup the product.
2. Before connecting the product, carefully read this manual. Improper connections may cause damage to AP F8.9 bit
or to the speakers in your car audio system.
- Multipolar cable, Input Speakers IN:
- Multipolar cable, Input Pre-IN:
- Multipolar cable, Rem/Control:
- Multipolar cable Speakers OUT:
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
IN 6
IN 5
IN 4
IN 3
IN 2
IN 1
OUT 8
OUT 7
OUT 6
OUT 5
OUT 4
OUT 3
OUT 2
OUT 1
1/2