User's Manual

ManualsBrandsAudiovox ManualsElectronicsXM Satellite RX with FM Transmitter

quick guide

XMCK-5

56 7

ANT IN

AUDIO OUT

AANNTT IINN

Plug in your XM antenna here. If

you choose the XM SureConnect

method of install, this is where

you plug it in.

AAUUDDIIOO OOUUTT

If you choose to use a cassette

adapter or a mini audio cable,

plug it in here.

DDCC IINN

This is where you plug in the

power adapter.

Step 4: Making your Vehicle’s FM Radio an XM radio. (Options 1 and 2)

Your Xpress

contains a built-in FM modulator that requires the use of either the included XM Sure-

Connect or the optional FM Direct Adapter (sold separately) to transmit the XM audio signal to your

vehicle’s FM radio.

First, turn on your car stereo. You will need to find a suitable FM frequency in order to get the best

sound. A suitable FM frequency is an unused frequency or weak station that is not located near a

strong FM station in your area.

Next, power on your Xpress

. Be sure all of your cables are properly connected. Turn the knob to go

to channel 1, this is the preview channel. You will not hear any sound through your car stereo until

you have chosen an FM Frequency.

Press Menu, look for this screen:

Press the XM button, then turn the knob to scroll

through the frequencies. Match the frequency to

the frequency you see on your car’s FM radio.

Now you should be able to hear your Xpress

through your FM stereo. If you can’t hear any

sound please check all of your connections and be sure your XM antenna is not obstructed.

Basic Controls

Turn on your Xpress

by pressing and holding the XM button. Subscribe to XM if you haven’t done

so already. To power down, press and hold the XM button.

SSeelleeccttiinngg CChhaannnneellss

Rotate the knob to scroll through the list of channels. Press the XM button to select that channel.

You can also set up Xpress

so that you do not have to press the XM button to select a channel.

See “Auto Tune Mode” in your user guide.

If you have channels assigned to favorites, press the button several times until you find the favorite

channel you would like to listen to.

UUssiinngg yyoouurr FFaavvoorriitteess

There are 10 user presets that can be stored using the favorites button. To set a channel to your

favorites:

1. Turn the knob to find your desired channel, then press the XM button.

2. Press and hold the favorites button for 2 seconds. The stored location for the channel will appear

across the top of the display.

You can access your favorite channels by pressing the favorites button.

When you attempt to add more than 10 favorite channels, your Xpress

will give you the option to

replace one of your previously saved favorite channels. To replace a Favorite channel:

1. Tune to desired channel.

2. Press and hold favorites button for 2 seconds. You will receive a message stating “ Favorites Full”

then you will be prompted to “Replace?”.

3. Rotate knob to navigate through your favorite channels.

4. Press XM to replace. You will receive a message confirming the replacement.

FCC Statement

Please note that the power cable that has been supplied with your device is supplied with perma-

nently attached ferrite beads. It is the responsibility of the user to use the power cable with the fer-

rite beads.

The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio

Inc. can void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the installation instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna of the affected receiver.

- Increase the separation between the XM equipment and the affected receiver.

- Connect the XM equipment into an outlet on a circuit different from that to which the affected

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Warning: The FCC and FAA have not certified this Satellite Radio Receiver for use in any air-

craft (neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support

this type of application or installation

DC IN