User's Manual

Step 2.

Once you have plugged the power

and antenna jacks into the car

cradle, use the included cable

organizer as shown in the illustra

tion at right to improve the overall

appearance of the installation.

Step 3.

Re-use the cable twist ties that were

provided with the power adapter and

car antenna cables and always be

sure to gather, bundle, twist-tie, and

secureany excess cable remaining

after determining the best location for

your satellite radio intallation.

For example, secure the excess cable up under your dash board,

between the seat and the console, or on the floor under a seat or

floor mat. This will help to prevent the excess cable from interfer-

ing with the everyday use of your vehicle, improve the appearance

of the installation, and avoid any undesirable accidental damage

to the cables that might result in loss of power or satellite signal.

Be sure to choose a location carefully by taking notice of how

doors and trunks open and close, as well as how seats move

when they are adjusted so you can be certain there is ample

clearance provided for the cables.