User's Manual

5. Connection Options

The Xpress Receiver and Cradle provide an audio output signal

in three ways:

a. FM Modulator - When using the XMC10 cradle with the

FM modulator option, the XM audio signal can be received

through your vehicle radio on selectable FM frequencies

using the menu options included in your Xpress Receiver.

(Refer to the Receiver owner’s manual.) The XM audio signal

can then be played through your vehicle radio when the car

radio is tuned to one of the available frequencies.

b. FM Direct Wiring - If the FM modulator does not provide

satisfactory performance in your vehicle, use the optional

FM Direct Adapter, Part # XMFM-1, which provides a hard-

wired FM output.

c. Low-Level Audio Output - For vehicles equipped with radio

head units with auxiliary audio inputs, the audio signal can

be routed through an optional audio cable (Part No. SAT-

RCA) and applied to the auxiliary inputs of a radio or

entertainment system. In this case, it is best to turn the

Xpress Receiver FM modulator option off to avoid

interference.