User's Manual

-28-
Auto-On
The Xpress XM7 unit is configured to shut down when the
vehicle is shut OFF or power is disconnected. By default, when
the power to the unit is reapplied the user must press the
Power button to turn the unit back ON. This feature allows the
user to program the Xpress XM7 unit to automatically turn ON
when the power to the unit is reapplied (much like a car radio).
When in the Auto-On menu use the Rotary/Select Knob to scroll
up (CCW) or down (CW) to highlight either On or Off (see Figure
34). When the desired setting is highlighted, press the Rotary/
Select Knob to enter the selection and a screen will appear
confirming “Auto-On” is set to ON or OFF. The UP and DOWN
buttons on the Remote Control also provide a similar function.
When the desired setting is achieved, press the (XM) Select
Button on the Remote Control to make the selection. Once a
selection is made a screen will appear to confirm the selection.
Figure 34. Auto-On Screen
Auto-Off / Sleep Timer
This feature allows the user to program the Xpress XM7 unit to
automatically Shut OFF if the unit remains in an inactive state for
a period of time ranging between 15 Minutes and 3 hours (see
Figure 35). There are 6 available settings:
• 15 Minutes
• 30 Minutes
• 45 Minutes
• 1 Hour
• 2 Hours
• 3 Hours
This feature is useful in preventing the vehicle battery from
draining in cases where the unit is installed with a constant
power source. It is also useful as a Sleep Timer turning the unit
OFF automatically after a period of time.
When in the Auto-Off / Sleep Timer mode use the Rotary/Select
Knob to scroll up (CCW) or down (CW) to highlight one of the
six (6) time settings you wish to select.
When the desired time setting is highlighted, press the Rotary/
Select Knob to enter the selection. The UP and DOWN buttons on
the Remote Control also provide a similar function.