User's Manual

-18-
Channel Skip/Add
The Channel Skip/Add function provides the ability to skip over
certain channels when using the Rotary/Select Knob or the UP
and DOWN buttons on the Remote Control. Upon entering this
mode, a channel list is displayed with the current channel in
play highlighted (see Figure 14). In front of each channel is a
plus sign (+) signifying that the channel is not skipped or a
minus sign (-) signifying the channel is skipped). Rotate the
Rotary/Select Knob to navigate the list and highlight the channel
to be adjusted. Once a channel has been highlighted, pressing
the Rotary/Select Knob changes the plus sign (+) or the minus
sign (-).
Figure 14. Skip/Add Channel Screen
Memory Recall
This feature allows the user to capture and store the current
program data information (Artist & Song title) with up to 20 listings
(20 Artist/Song Title combinations) (see Figure 15). The unit also
has the capability to search the current incoming XM7 signal and
alert the user when a saved song is being played.
Press and release the memory (mem) button to save the informa-
tion of the current broadcast song or program. The Xpress XM7
unit can hold up to 20 entries, after which any new information
that is saved will replace the oldest entry in memory. To recall
saved information, press and hold the memory (mem) button for 3-
seconds. The Xpress XM7 unit will provide a continuous view of
the Channels, Songs and artists held in memory. Rotating the
Rotary/Select Knob counterclockwise will access the previous
memory content or clockwise to access the next memory content.
The UP and DOWN buttons on the Remote Control also provide a
similar function.
Figure 15. Memory Recall Screen