User's Manual

-17-
Direct Tune
Turn the Rotary/Select Knob CW or CCW to highlight choice
(Direct Tune On or Direct Tune Off). When the desired setting is
highlighted, press the Rotary/Select Knob or the (XM) Select
Button on the remote control to confirm (see Figure 12). The
direct tune function when enabled (ON), allows the user to
manually tune to a station using the Rotary/Select Knob or the
remote control UP and DOWN buttons. The unit will automati-
cally switch to the selected station without pressing the Ro-
tary/Select Knob or the (XM) Select Button on the remote con-
trol. When direct tune is set to off, this allows the user to
manually tune to a station using the Rotary/Select Knob or the
remote control UP and DOWN buttons. The Rotary/Select Knob
or the (XM) Select Button on the remote control must be pressed
to confirm the selection.
Figure 12. Direct Tuning Screen
Search Mode
This feature allows the user to change the way the search
button on the Xpress XM7 unit functions. The Search button
can be set to search categories, to scan through all presets (A,
B, C) or all available channels.
Upon entering this mode, two options are displayed “Search by
Category” and “Search by Scanning” (see Figure 13). Use the
Rotary/Select Knob or the UP and DOWN buttons on the Remote
Control to switch between the options. When the desired set-
ting is highlighted, press the Rotary/Select Knob or the XM Se-
lect button on the Remote Control to make the selection. Once
a selection is made a screen will appear to confirm the selec-
tion “Search by Category Set” or “Search by Scanning Set”.
Figure 13. Search Mode Screen