User's Manual

-15-
Brightness + Contrast
This feature allows the user to adjust the brightness and con-
trast of the unit’s display (see Figure 9). Upon entering either the
brightness or contrast mode, a horizontal bar graph is displayed
with a minus (-) sign on the left and a plus (+) on the right. Use
the Rotary/Select Knob to switch between the contrast and the
brightness adjustments. Once the adjustment is selected press
the Rotary/Select Knob to enter the adjustment mode. If there is
no activity for 12 seconds, the unit will exit to active channel
screen.
Brightness mode: Turn the Rotary/Select Knob CW or use the
UP arrow on the Remote Control to increase the screen’s bright-
ness. Turn the Rotary/Select Knob CCW or use the DOWN ar-
row on the Remote Control to decrease the screen’s brightness.
Contrast Mode: Turn the Rotary/Select Knob CW or use the UP
arrow on the Remote Control to increase the screen’s contrast.
Turn the Rotary/Select Knob CCW or use the DOWN arrow on
the Remote Control to decrease the screen’s contrast.
Figure 9. Brightness and Contrast Screen
Audio Level
This feature allows the user to set the audio output signal level
(see Figure 10). Upon entering the audio level mode, a horizon-
tal bar graph is displayed with a minus (-) sign on the left and a
plus (+) on the right. Use the Rotary/Select Knob to adjust the
audio level. When the Rotary/Select Knob is turned CW the
audio level signal is increased. When the Rotary/Select Knob is
turned CCW the audio level signal is decreased. The UP and
DOWN buttons on the Remote Control also provide a similar
function. When the desired setting is achieved, press the Ro-
tary/Select Knob or (XM) Select Button on the Remote Control to
confirm.