VOH704 VOH703 Drop Down TV/Video Monitor OWNER’S MANU AL MANUAL ® ELECTRONICS CORP.
WARNINGS ! Do not use any solvents or cleaning materials when cleaning the video system. ! Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. ! Lock the LCD screen in the fully closed position when not in use. ! Before putting on headphones always adjust the volume setting to the lowest position.
Features Congratulations on your purchase of the Audiovox VOH703 drop-down TV / Video Monitor. The VOH703 has been designed to give you and your family many years of video entertainment in a mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment.
1 4 2 3 5 6 7 8A 9 10 11 12 8B -4-
Front Panel 9. Three position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. • Off – Turns off dome lights and prevents them from lighting when the switch is in the off position. • On – Turns on the dome lights. 10. Dome lights – provide additional interior vehicle illumination. 11. Screen Release – Slides in the direction of the arrow to release the drop down screen. 12.
REMOTE CONTROL OPERATION 7 1 BATTERY INSTALLATION 2 Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Press down on the ridged area of the battery cover and slide it off. 2) Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. 3) Slide the cover back until it clicks.
Remote Controlled TV/Monitor Functions BRIGHTNESS, COLOR and TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed. 6. MUTE BUTTON Press this button to remove the sound at the headphone stations. The screen will display the volume adjustment bar for 6 seconds, indicating that the sound has been turned off.
13. PLAY BUTTON Press this button to activate play mode while a tape is loaded into the VCP. This button may also be used to disengage search and pause modes. For more information, consult the VCP owner’s manual. 14. “F.FWD.” FAST FORWARD BUTTON If this button is pushed while the tape is stopped, tape will fast forward. If this button is pushed while the tape is playing, the VCP will go into fast forward search mode. For more information on the search feature of the VCP, consult the VCP owner’s manual. 15.
CHANNEL SET UP 4. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until “MANUAL MEMORY XX ERASE” is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. Note : Please refer to page 3 for more information on TV reception. In order to easily access all available TV channels, it may be necessary to perform channel autoprogramming whenever the vehicle’s geographic location has changed, i.e. city to city, weak signal area.
Operation Remote Sensor The VOH703 incorporates an Infrared sensor which relays signals from the remote control to allow the VOH703 and VCP to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can relay signals from any manufacturer’s remote controls to the component connected to the Video 1 and 2 inputs, such as a DVD player.
Video Output The VOH703 provides a video output for an optional video monitor(s). (Refer to page 6 of the installation guide for more details.) This output will provide a video signal that duplicates the signal displayed by the VOH703 to an additional monitor or video display. Please see your installer for more information. Optional Accessories Wired Headphone There are two 1/8” headphone jacks on the VOH703 that can be used with any standard stereo headphones.
Aux Video 2 The second video input may be connected to a DVD player, video game system, or other audio/video input. To play the Video 2 source, turn the VOH703 on and press the source button on the VOH703 or the TV/ Video button on the remote control until “Video 2” is displayed on the screen. Turn the source component on with its power button or remote control. The VOH703 is now ready to play the audio and video signals from the source connected to video 2 inputs.
Troubleshooting PROBLEM Poor TV reception Replacement Parts SOLUTION • Perform auto programming of the tuner. • Verify antenna condition. • Note: Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the transmitter, nearby surroundings and weather may adversely affect TV reception. These conditions may result in the following: picture roll, "snowy" picture, or momentary loss of color. Please refer to page 2 for more information on TV reception.
36 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
NOTES
For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2002 Audiovox Electronics Corp.
