Owner`s manual

This unil has additiona] menus that are displayed in the
front panel display. The advanced setup nlenu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.
• Only_)STANDBY/ON(_)PROGRAM </L>,and
_STRAIGHT are ell_ctive while you a=>Llsingthe advanc_.d
getup menu
• No othel operaUons call be made _hile you are tlsing the
ldv Hlced setup mol_U
• The advanced setup menu isonly available in die h'ont pmel
display
1 Press QSTANDBY/ON to set this unit to the
standby mode.
2 Press and hold QTONE CONTROL and
then press @STANDBY/ON to turn on this
unit.
This unit turns on. and the adwmced setup menu
appears in the fYonlp_mel display.
3 Press _)PROGRAM <I/D to select the
parameter you want to adjust,
The name of the selected parameter appears in lhe
fl'ont panel display.
4 Press @STRAIGHT repeatedly to change
the selected parameter setting,
5 Press QSTANDBY/ON to confirm your
selection and set this unit to the standby
mode,
The seltil_gs you made are rellected nex[ time you ttn'n on this
mdt
• Speaker impedance !!;P i_F:'=
(U.S.A. and Canada models only)
Use this feature to set lhe speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8D MIN, 6D MIN
• Select "8-Q MIN" 1oset lhe speaker impedance to 8 ft.
• Select "6Q MIN" to set the speaker impedance to 6 _2.
8D MIN
6D_MIN
FIont (A ol B)
The impedance of each
Ccnte] speake] rnus{ be 8 -Q o]
higher
SuiTouild
Floi]t {A ol B)
Thein_pedanceofeach
(2"nlel speakel must be 6 -Q o]
higher
SLII 10UnJ
• SIRIUS Satellite Radio Parental Lock
code number reset !!;'.:_RF:'._:E
Use this I_ature to set the code number IE_rthe SIRIUS
Satellite Radio Parental Lock I_ature to the initial factory
setting.
Choices: RESET. CANCEL
• Select "RESET" to set the code number to the initial
factory setting.
• Selecl "CANCEL" 1oset lhe code number to lhe initia]
fl_ctory setting.
Even il you sel 'SSR PIN" 1o 'RESET". [l/is unh does not u nlock
[he locked channels The initial lactory setling ol¸lhe Parenlal
Lock code mu_aber is "0000"
76 En