Owner`s manual

You can control other components by setting the
appropriate ]'emote control codes. For a complete list of
available remote control codes, ret)r to "List of remote
conlrol codes" at the end of this manual.
Remote control code default settings
CD
MD/€'D R
TUNER
DVI)
DTV/C'BL
CD YAMAHA
CD_R YAMAHA
TUNER YAMAHA
DVD YAMAHA
V-AUX TUNER YAMAHA
DVR DVR YAMAHA
XM TUNER YAMAHA
SIRIUS TUNER YAMAHA
A TUNER YAMAHA
B TUNER YAMAHA
C TUNER YAMAHA
5013
5001
5007
2000
5(H I
2(M 1
5009
5017
5012
5009
5017
2
While pressing and holding one of the input
selector buttons (@) on the remote control to
select the input area you want to set up,
press @AV POWER for more than 3
seconds.
[_ xM _lRlUS
MD/C_.R TUNER
©© oow °
DVR [_
P,e s,o,
© © © seconds
While holding down
Press the numeric buttons (0 to 9) (_)) to
enter the four-digit remote control code for
the component to be used.
When the setting succeeds, "Rem_teSetup OK"
appears; however, when it does not, "RemoleSetup
NG" appems in the ti"ontpanel display.
• II the" lii_lnLl_ct[lrer of you r component has more than one cod_'.
try each o_ diem tmtil you find the con'ect/me
• II you do not press any buttons within 30 seconds in step 2, the
setup process is canceled. II this happel=s, repeat the setup
procedme
Y/m may rlOl be abk- to opel'ale yotll- Yamaha corn pol_enl even i J"a
5r2unaha remo(e control code is pJesel as listed above In this case.
IJy setting anotheJ Yamaha remole conlJol code
|
75 En