Owner`s manual

• Audio select C;,_tC-i0 SEL.ECT
Use this featnre to designate the default audio input jack
select setting tbr the input sources when you turn on the
power of this unit.
Choices: AUTO, LAST
3 OPTION MENU
C>#JDI0 SELECT
>AUTO UqST
[4]=[hi:Select
Select "AUTO" if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
Select "LAST" if you want this unit to automatically
select the last input mode used R_r the connected input
source (see page 34).
• Parameter initialization O?PFiRi:iH= iNi
Use this [_ature to set all the parmneters of the sound field
programs to the initial factory settings.
Choices: NO. YES
__ #EZ!#E r!E#!!............................
D>P_4R_¢I, IFII
X40 /ES
[4J,'[FJ_ Select
[ ENTER ] ! Return
Select "NO" to cancel file parameter initialization and
retl_rn to the previous menu screen.
Select "YES" and press @ENTER to set all the sound
field parameters to the initial lactory settings.
• YOU cann()l auh!malically reverl Io the pnwious paramelel
setdngs once you initialize Ihe sound lield plogram parameters
• You cannot separately initialize individual sound fiekl
program s
• You cannot inid dize any sound lield pix_gram groups when
"MEMORY GUARD" is set to "ON"
Bluetooth setting E)BLUErOOTH SET
3 OPT!ONMENU
E>BLUETOOTHSET
STRRT PRIRING
[ ENTER ] ! Enter
Use this feature t()start pairing the connected Ymnaha
Bluetooth adapter (such as YBA-10. sold separately) with
your Bluelooth component. For details about the pairing,
refer to _Pairing the Bluetooth TM adapter and your
Bluetooth component" on page 59.
To ensure security, a time linlit of 8 minutes is set R_r
the pairing operation. You are recomn_ended to read
and IMly understand all the instructions before starting.
1 Press @ENTER to start pairing.
The connected Bluetooth adapter starts searching
Bhetootl conpone/s. Se rch n_... a)pears 1 the
video monitor.
2 Check that the Bluetooth component detects
the Bluetooth adapter,
If the Bluetooth conlponent the Bluetooth adapter,
"YBA-IO YAMAHA" (example) appears in the
Bluetooth device list.
3 Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
"0000" on the Bluetooth component.
Once this unit completes the pairing successfully
"Pairing completed" appears.
To cancel the pairing, press @RETURN Io exil from
'START PAIRING"
4
Press @RETURN to exit from "START
PAIRING".
• 11 Ihe connected Bluetooth adapter camlot find my Bhletoodl
components, "No_ l_mnd" appears¸
• 11TMa Bhle[ooth adapter is not connected [o tilts uniL "No
Blueloolh Adapter" appears¸
|
71 En