Owner`s manual

Caution
Extreme caution shouM be exercised when you play
back CDs encoded in DTS. If you play back a CD
encoded in DTS on a DTSqncompatible CD player,
you will only hear some unwanted noise that may
damage your speakers. Check whether your CD player
supports CDs encoded in DTS. Also, check the sound
output level of your CD player before you play back a
CD encoded in DTS.
1 Turn on the video monitor connected to this
unit,
2 Press@SPEAKERS repeatedly to select the
front speakers you want to use,
The respective speaker indicators lights up in the
t?ont panel display.
3 Press @INPUT <_/_> repeatedly (or press
one of the input selector buttons (@)) to
select the desired input source,
The name of the cunel]tl_ selected input source
appears in the front panel display t_r a Ii:w seconds.
Available input sources
l
/.....................................1
, i,i'{r" U i ,= LJL,_-_ ,
IL T
Currently selected input
source
Start playback on the selected component or
select a broadcast station.
• Ret_r to the operating instructions for the source
component.
• See page 43 l_r details about FM/AM tnning
instructions.
• See page 46 for details about XM Satellite Radio
tuning instructions.
• See page 51 t_r details about SIRIUS Satellite
Radio tuning instructions.
5 Rotate @VOLUME (or press
_VOLUME +/-) to adjust the volume to the
desired output level.
6 Press @PROGRAM <_/_> repeatedly (or
press @AMP and then @ PROG <_ / _>
repeatedly) to select the desired sound field
program.
The name of the selected sonnd fieM progranl appears
in the lront panel display.
See page 38 for details about sound field programs.
IF{U=..-+.Li:::= L-q'*-:::Hq -:::+!.- £ L.-,
k
Currently selected
surroundfield program
• Choose a sound field program based on your listening
pre_2?lR?l_CQ I_O[ 113eB?ly o1_ [he name of the pl'ogralll
• Whe n you select an inpu[ SOreR:e, this uni[ automatically selects
the last sound field program used with the corl_spondhlg input
SOtll'Ce
• Sound field programs cannot be selected when the componen[
connecled to Ihe MULTI CH INPUT jacks is selected as [lle
inpu[source/see page 34).
• When PCM signals wid/a sampling l?eqLlency higher than 48
kHz are input, this traitis automatically set tothe _'STRAIGHT*'
mode (see page 39)
• To display in_>rnlationabout the currently selected input sou=re
in tl_eOSD. see page 36 I_>rde[ails
• A quick guide to contents
See
When you want to...
page
Enloy high qualily sound 41
Adjusl the Ional qtmlit_ Oi Ihe h'ont speakers 41
Adlusl Ihe paranlelets ol sound IieM ploglams 40
Lnjov the sources vd_h a _idc d_narnic range a_ nigh_ 42
Use headpimnes 35
Sek'ct a decodc_ Io pla_ back sotnces _ith 39
Aulomati_ally se{ Ihis unil 1o the slandby m{xle _7
|
33 En