Owner`s manual

• Controlling the input source
components in the SCENE mode
Youcan opel'ale both this unit midthe input source
component by using the remote control. You]nust set the
appropriate remote control code 12)reach input source in
advance (see page 75).
1 Press the desired @SCENE button on the
remote control,
2 Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
.... -- SCENE bunons
• Setting input source of the customized
SCENE template on the remote control
If you customize tile input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correcdy.
Press and hold the _SCENE button and the
desired input selector button (@) for 3 seconds.
P=essthe @SCENE buttonagai. {ooperaie the input source
component
These bLlllons coiltl'o] tile ]n])l]l SOtll'ce conlpollelll See page 74
fol" de{ails of the JuIlcti(>ll (>]_each bu{ioll
32 En