Instruction manual

– 22 –
(3) Lowering and raising of the spindle should be performed by
the AA-970 accessory finger lifter or the optional AA-971
Top Lifter.
(4) Care should be taken not to TOUCH the spindle with the
hands as dirt on the spindle can impair smooth movement. If
dirt has accumulated on the spindle, wipe it off with a cloth
dampened with alcohol.
(5) If the gauge has not been used for a long period, recharge
the battery and perform a system reset.
(6) Since the gauge is made of high-precision components, avoid
disassembling it or treating it roughly.
(7) After use, remove dirt from the contact tip and spindle, using
a dry soft cloth.
(8) If the outer case becomes soiled, wipe it with a dry soft cloth.
If the core becomes extremely soiled, wipe it with a cloth
slightly dampened with a neutral detegent.
Avoid volatile organic solvents such as thinners, since these
types of liquid may damage the case.
(2) Replacement of Contact Tip
When replacing the contact tip, hold the spindle firmly using
a rubber band or similar material.
Spindle
Rubber band