Instruction manual

– 15 –
Switch power ON once again, “B” will appear for approxi-
mately two seconds, after which the power will be switched
off automatically.
: This indicates the counting direction.
: Addition (+ direction) when spindle is pushed in.
: Subtraction (– direction) when spindle is pushed in.
+: This indicates that the measured value is positive. For
negative value, “–” will appear in the display and for a
measured value of 0, no sign is indicated.
AB: This indicates that the absolute zero function has been
selected.
P: This indicates that the preset function has been selected.
If “P” is flashing, this indicates that the preset setting pro-
cedure is in progress.