Instruction manual

– 11 –

MIN mode will be the preset value and, in the R mode, the

preset value will be zero.

(2) If the RESET switch is pressed for more than two seconds

and released, return is made to the normal function. After

this, if the switch is pressed further, the absolute zero func-

tion will be selected.

2. Direction Switch

In this function, the direction cannot be changed. It is fixed as the

direction

In this function, the direction cannot be changed. It is fixed as the

direction selected in the normal function.

3. Mode Switch

In this function, mode switching is not possible (i.e., it is pro-

tected).

In the normal function, if the MODE switch is pressed for longer

than two seconds, the “P” mark appears in the display and the

preset function is ready for use. In this function, the MODE switch

has two functions.

(1) If the mode switch is pressed for less than two seconds, the

preset mode is reached and the sequence normal → MAX

→ MIN → R is switched through, after which return is made

to the normal mode.

(2) If the mode switch is pressed for more than two seconds,

switch is made to the preset setting procedure. The preset

value setting is also made using this mode switch. For de-

tails, refer to Section 6, Preset Setting Procedure.