Owner`s manual
97
NOTE: If the rear-view video camera is connected and the unit is on, Camera
mode is selected upon shifting into REVERSE gear. If the monitor is in display
mode, the monitor automatically switches to CAMERA mode upon reverse
driving. When the reverse driving stops, the monitor returns to its original input
mode.
General Sub-menu Settings
Setting Options Function
User Interface
Color
Aqua This setting allows the user to select ve pre-
dened LED colors for the front panel illumination.
Red
Blue
Amber
Green
Tuner Region Europe • AM Frequency Spacing - 9 kHz
• AM Frequency Band - 522 kHz ~ 1620 kHz
• FM Frequency Spacing - 50 kHz
• FM Frequency Band - 87.5 MHz ~ 107.9 MHz
TFT Standby Off Screen remains on continuously.
10s Screen goes blank (standby mode) after 10
seconds of inactivity. Touch the screen to exit
standby and view the display.
20s Screen goes blank (standby mode) after 20
seconds of inactivity. Touch the screen to exit
standby and view the display.
Dimmer Mode Auto This setting dims the LCD screen when the
vehicle’s headlights are turned on. Five settings
are pre-dened.
Night
Dark
Normal
Bright
RGB Light Adjust This setting allows the user to tune the RGB colors
of the LEDs to obtain an exact match for their
vehicle.
Beep Off No beep sounds.
On When turned on, an audible beep tone conrms
each function selection.