Operating instructions

19
VM9414
Video Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor
is retracted inside the unit, the TFT monitor automatically moves into the
viewing position and Camera mode is selected upon shifting into REVERSE
gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside
unit.
If the monitor is in display mode, the monitor automatically switches to
CAMERA mode upon reverse driving. When the reverse driving stops, the
monitor return to its original input mode.
Audio Sub-menu Features
TFT Open Off You must press the OPEN button (1) to open the TFT
panel.
Auto The TFT panel automatically opens when the unit is
turned on.
Manual When the ignition is turned OFF, the TFT panel DOES
NOT retract if it was previously out.
Version View radio software version information.
Setting Options Function
TV Shape 16:9
4:3
Aux IN Auto The color signal output is switched automatically based on
the current video input signal - NTSC or PAL.
PAL The color signals are output in the standard PAL format.
NTSC The color signals are output in the standard NTSC format.
Brightness 10 to (-10)
Setting Options Function
Bass Freq 60Hz Adjust Bass boost/cut frequency. Range of adjustment is +/-
12 dB.
80Hz
100Hz
120Hz
Middle
Freq
500Hz Adjust Middle boost/cut frequency. Range of adjustment is +/
- 12 dB.
1kHz
1.5kHz
2.5kHz
Setting Options Function