Operating instructions

12
VM9414
OPERATING INSTRUCTIONS
Power On / Off
Press the SRC/ button (10) on the unit (or the button (4) on the remote
control) to turn the unit on. The buttons on the front of the unit light up and the
current mode status appears in the LCD (7). You can also turn on the unit by
pressing the OPEN button (1) and opening the TFT screen.
Press and hold the button to power off the unit.The monitor is drawn back
into the main compartment.
Remote Control Functions
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the MUTE button (17) on the front panel or remote control (3) to mute
the volume from the unit. Press the rotary encoder button again to restore the
volume. Adjusting the volume or using any of the audio setup features cancels
the mute function.
Playing Source Selection
When the monitor is closed, press the SRC button on the front panel (10) or
remote control (8) to change between available audio playing sources in the
following order: NAVI, RADIO, DISC, SD, USB, XM, BLUETOOTH, AV2, AV1,
CAMERA, REAR. The mode is displayed on the LCD screen.
Table 2: Common Remote Control Functions
SRC Select playing source
MUTE Toggle audio output on/off
OPEN Open/close TFT monitor
POWER/
Turns the power on/off
/ / /
Menu Navigation
VOL - Decreases volume
VOL + Increases volume
PIC View PICTURE MENU to adjust brightness
MENU View SOURCE menu
SEL Access equalizer menu