VBP800 PORTABLE 8" LCD MONITOR AND DVD PLAYER IN A BAG
Notice: This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
A. Introduction Thank you for selecting the VBP800 portable DVD player in a bag. The main features include a 8" Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices home or vehicle. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation.
5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only. 6. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Do not touch the surface of disc.
2. Powering the system in a car Plug one end of the cigarette lighter adapter into the DC 9V jack on the unit, then plug the other end into the cigarette lighter socket. Figure 1 3. Powering the system with rechargeable Battery Please refer to K. * Rechargeable Battery Installation and Use (Page 33 and 35). E.
1.Installing the System onto the seat back in a car (Refer to Figure 2) Seat Standoff Figure 2 1). Take one of the supplied straps from the carrier bag. Connect the latch to one of the upper metal rings on the mounting bag. Connect the “S” hook to the other upper metal ring and place the loop over the headrest. Adjust the strap until the bag is firmly secured. 2). Take another strap from the carrier bag, and connect the latch to the lower metal ring on the left side of the bag.
2. Installing the system between the driver/passenger seat (Refer to Figure 3) Figure 3 1). Take one strap and connect the latch to the upper metal ring on the left side of the bag. Attach the “S” hook to the same ring after looping the strap around the headrest of the driver’s seat. Repeat this process for the right side (Passenger Seat). 2). Take another strap and connect the latch to lower metal ring on the left side of the bag.
F. Controls, Indicators, and Connectors 1.
2.
G. Loading and Playing a Disc a. After connecting power to the unit, slide the POWER ON/OFF on the right side to ON, the DVD player’s POWER indicator lights. b. Open the disc tray by pressing OPEN at the lower right of the disc tray, and place a disc into the tray with the disc’s label facing up. c. Press at the right side of the door until it clicks shut. The unit will load the disc and start playing. d. Rotate BRIGHT and VOLUME to adjust the LCD’s brightness and the DVD player’s volume. e.
H. SETUP Press ‘SETUP’ to display the Main screen o f the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume its last playback mode. 1) Press ‘SETUP’, the ‘General Setup’ page will display on screen. General SETUP Menu Screen a).Select ‘TV Type’ using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose TV Type using UP/DOWN and then press ENTER to confirm the setting. Press the LEFT button to return. TV Type Screen Display b).
TV DISPLAY Screen Display * Normal/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen. * Normal/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * Wide: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. c).Select ‘ANGLE MARK’ using the DOWN buttton, and then press the RIGHT button to enter the submenu.
d). Select ‘SCREEN SAVER’ using the DOWN button. SCREEN SAVER Display *On: enables screen saver *Off: disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen. e). Select “ Last Memory” by using the DOWN button. LAST MEMORY Screen Display *On: The unit will return to the last position on the disc. *Off:: The unit will not return to the last position on the disc.
a).Select “Brightness” by using the UP or DOWN buttons ,then press Enter you can change the brightness by pressing the LEFT or RIGHT buttons. To exit Brightness setting, press Enter again to return the main Menu. BRIGHTNESS Screen Display b).Select “Contrast” by using the UP or DOWN buttons,then press “Enter” you can adjust the Contrast by pressing the LEFT or RIGHT butttons. CONTRAST Screen Display To exit “Contrast” setting, press Enter again to return to the main Menu. c).
d).Select “Saturation “ by using the UP or DOWN buttons, then press “Enter” you can adjust the Saturation by pressing the LEFT or RIGHT buttons. SATURATION (Color)Screen Display To exit “Saturation” setting, press “Enter” again to return to the main Menu. 3).Select “Password” using the LEFT or RIGHT buttons,press Enter to enter the password setup page,then press the RIGHT button to enter the submenu. PASSWORD CHANGE Menu Press ‘Enter’ to enter the Password Change Page.
PASSWORD VERIFY Input Screen Display NOTE: The Default Password is 3308 . This password is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot. 4).
Preference Subtitle Language c. Select ‘Disc Menu’ using the DOWN button, then press RIGHT to enter the submenu. Select the Disc Menu Language you desire using the UP or DOWN buttons , then press Enter to confirm the setting. Press LEFT to return. Preference Disc Menu LANGUAG Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages.
Select the parental level you desire using the UP or DOWN buttons for discs with lock-out function or multiple rating levels. These are listed from the lowest level (1 Kid Safe) to the highest level (Adult). Enter a 4 digit password, then press ‘ENTER’ to confirm the parental level setting. NOTE: The level of 8 Adult is the factory default. e. Select ‘Default’ using the DOWN button, then press RIGHT to enter the submenu. Press Enter to make the setting return to the factory-set mode.
I. Playing DVD 1.
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. 3. DISPLAY (Display contents vary from disc to disc.) 1. PLAYING TIME AND REMAINING TIME a.
c. Press ‘DISPLAY’ a 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Elapsed Time Screen Display d. Press ‘DISPLAY’ a 4th time to display the Remaining Time for the chapter. The heading will disappear automatically in 3 seconds. Chapter Remaining Time Screen Display e. Press ‘DISPLAY’ a 5th time to exit, ‘Display Off’ will be displayed and will disappear automatically in 3 seconds. 2.
Angle Screen Display 3. SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total number of subtitle languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles off, press the ‘SUBTITLE’ button until ‘Subtitle Off’ is displayed. The Subtitle display will disappear automatically if the ‘SUBTITLE’ button is not pressed again within 3 seconds.
4. AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current audio channel number (1) and the total number of audio channels (2) displayed. Press ‘AUDIO’ again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed within for 3 seconds. Audio Language Screen Display * Some DVDs only allow access to this function through the DVD menu. 5.
6. A-B REPEAT a. During playback press first time ‘A-B’ to set the Starting Point A. A-B Repeat Starting Point Screen Display b. Press ‘A-B’ second time to set the Ending Point B and the layer will repeatedly play the part between Point A and Point B. A-B Repeat Ending Point Screen Display c. Press A-B a third time to cancel A-B repeat and resume playback.
7. REPEAT a. During playback press ‘REPEAT’ once to repeatedly play the current chapter. Chapter Repeat ON Screen Display b.During playback press ‘REPEAT’ again to repeatedly play the current title. Title Repeat ON Screen Display c. During playback press ‘REPEAT’ a 3rd time to repeat all Chapters and Titles.
d. Press “REPEAT” a 4th time, to resume normal play. Repeat Off Screen Display 4. PLAYING AUDIO CDS When playing an audio CD press the DISPLAY button on the remote to view time information. The options below show you what information is available using this function. a. The current track and playing time of that track will be displayed on the screen. SINGLE ELAPSED Screen Display b. Press ‘DISPLAY’ one time and ‘Single Remain’ appears along with the current track playing and the amount of time left.
c. Press ‘DISPLAY’ a 2nd time and ‘Total Elapsed’ appears along with the current track playing and the total time that the CD has been playing. TOTAL ELAPSED Screen Display d. Press ‘DISPLAY’ a 3rd time and ‘Total Remain’ appears along with the current track playing and the amount of time remaining on the CD. TOTAL REMAIN Screen Display e. Press ‘DISPLAY’ a 4th time and ‘Display Off’ will appear momentarily then disappear. The CD time Information will not be displayed.
5. PLAYING MP3 DISCS MP3 is a format for storing digital audio. An audio CD-quality song is compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R /RW discs that have been encoded in MP3 format are compatible with this system.
Use the ( NEXT ) button to move to the next song. Press the (PREVIOUS) button to move to the beginning of the previous song. Using The Repeat Feature The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • SINGLE • REPEAT ONE • REPEAT FOLDER • FOLDER Pressing REPEAT a 5th time will resume normal playback. As you toggle through the options, the repeat option changes. The selected repeat option loops repeatedly until you turn it off.
6. Playing JPEG file 1) Load the JPEG Disc into tray. 2) Select JPEG file by pressing “UP/DOWN” button. 3) You can open the JPEG file by pressing “Play” or “ENTER”. 4) Pressing the “LEFT Key“ will rotate the picture90 degrees counterclocckwise. Pressing the “RIGHT Key“ will rotate the picture clockwise. 5) When browsing the photos, you can reverse the photo horizontally by pressing “UP” key,or you can reverse the photos vertically by pressing “DOWN” key.
k. Press “display” 11th time, “COMPRESS TO CENTER H” will display on the screen, the picture will refresh from top and bottom to center. l. Press “display” 12th time, “COMPRESS TO CENTER V” will display on the screen, the picture will refresh from right and left to center. m.Press “display” 13th time, “WINDOW H” will display on the screen, the picture will refresh from four window’s top side to bottom side. n.
7. Connecting to a TV or another monitor ( Refer to Figure 6) You can also connect the DVD player to a TV to enjoy high quality stereo sound and picture on another monitor. 1. Connect one end of the audio/video cable’s black (1/8” stereo plug) plug into the unit’s DVD AUDIO OUT jack, and connect the other end to the AUDIO INPUT jacks on your TV or Monitor (white = left channel, red = right channel). 2.
K. Rechargeable Battery Installation and Use The player utilizes a set of long-life Ni-Mh batteries for a portable power supply. Ni-MH batteries feature high storage capacity and low level of degradation. This means the Ni-MH batteries do not have “Memory Effect” and thus can be recharged safely regardless of whether the battery is fully or only partially discharged. Please fully charge the battery prior to first use.
Using and Maintaining your Rechargeable Batteries 1.Please make sure you always use only the AC adapter included with the player to recharge your batteries. 2.Recharge efficiency will degrade when environmental temperatures drop below 50oF (10oC) or exceed 95oF (35oC). 3. Please remove battery from the player and store it properly if the player is not to be used for long time. During this period , please recharge the battery at least once two months to avoid irreparable damage to the battery.
Removing the Battery Pack: 1. First, make sure the player is in “Stop” mode and the AC power supply has been disconnected. 2. Press the release button on the Rear of battery. 3. Slide the battery towards the Front of the unit. Figure 9. Removing the DVD Player Battery L.Using Wired and wireless headphones(Refer to Figure 7) 1.Wired headphones Optional wired headphones may be used with the unit. Simply plug in the headset to either Headphone Jack 1 or Headphone jack 2 on the right side of the monitor.
M. Wiring Diagram (Power Adapter With Built-in Wireless FM Modulator) AUDIO L/R INPUT This power adapter has a built-in wireless FM Modulator. The FM modulator is designed to transmit the audio from your DVD player to your vehicle radio. The channel select switch is used to select the modulator frequency (88.1MHz, 88.3MHZ, 88.5MHz and 88.7MHz). The vehicle radio must be tuned to the same frequency that is selected on the wireless FM modulator.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2004 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y.
