VBP50 PORTABLE 5" LCD MONITOR & DVD PLAYER
Notice: This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
A. Introduction Thank you for selecting the VBP50 portable DVD player in a bag. The main features include a 5" Screen (4:3 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy installation.
5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the system only. 6. Disc Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Do not touch the surface of disc.
2. Powering the system in a car Plug one end of the cigarette lighter adapter into the DC 9V jack on the unit, then plug the other end into the cigarette lighter socket. Figure 1 3. Powering the system with optional rechargeable Battery Please refer to L. * Rechargeable Battery Installation and Use (Page 29 to page 31). * Rechargable Battery Pack No. VBB5058 is OPTIONAL E.
1.Installing the System onto the seat back in a car (Refer to Figure 2) Seat Standoff Figure 2. 1). Take one of the supplied straps from the carrier bag. Connect the latch to one of the upper metal rings on the mounti ng bag. Connect the “S” hook to the other upper metal ring and place the loop over the headrest. Adjust the strap until the bag is firmly secured. 2). Take another strap from the carrier bag, and connect the latch to the lower metal ring on the left side of the bag.
2. Installing the system between the driver/passenger seat (Refer to Figure 3) Figure 3. 1). Take one strap and connect the latch to the upper metal ring on the left side of the bag. Attach the “S” hook to the same ring after looping the strap around the headrest of the driver’s seat. Repeat this process for the right side (Passenger Seat). 2). Take another strap and connect the latch to lower metal ring on the left side of the bag.
E. Controls, Indicators, and Connectors 1.
2. Remote Control View (Refer to Figure 5) 1) Display Button 2) Angle Button 3) Subtitle Button 4) Audio Button 5) Zoom Button 6) Up/Down/Left/Right/Enter Buttons 7) Return Button 8) A-B Button 9) Forward Button 10) Reverse Button 11) Slow Button 12) Stop Button 13) Number Buttons 14) Setup Button 15) Menu Button 16) Repeat Button 17) Previous Button 18) Next Button 19) Play Button 20) Pause Button Figure 5 F. Loading and Playing a Disc a. b. c. d. e.
f. To turn off the DVD player, slide POWER ON/OFF to OFF. The DVD player’s POWER indicator turns off. g. To remove the disc, open the disc tray, then you will see a picture on the right inner corner of the cover to indicate how to remove the disc, just use your finger to access the right inner corner of the disc tray and lift up the disc and remove it from the disc tray. Please refer to Figure 6.
G. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback or stop mode. Figure 6. Main SETUP Menu Screen 1) Select ‘GENERAL SETUP’ using the UP/DOWN buttons, then press ‘ENTER’ to enter the GENERAL Setup screen. Figure 7. General SETUP Menu Screen a. Select TV DISPLAY using UP/DOWN, and then press RIGHT to enter the submenu.
* WIDE: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. b.Select ‘ANGLE MARK’ using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose Angle Mark on or off displayed on the screen using the UP/DOWN and then press ENTER to confirm the setting. Press the LEFT button to return. Figure 8. ANGLE MARK Screen Display * ON: The screen will show angle mark. (*If angle option is available) OFF: The screen will not display the Angle Mark c.
2) When there is no disc inside the player select ‘PREFERENCES’ using UP/DOWN, then press ‘ENTER’ to enter the preferences page. Figure 9. AUDIO Preference Screen Display a. Select ‘AUDIO’ using UP/DOWN, then press ‘RIGHT’ to enter the submenu. Select the audio language you desire using UP/DOWN, then press ‘ENTER’ to confirm the setting. Press LEFT to return. b. Select ‘SUBTITLE’ using UP/DOWN, then press RIGHT to enter the submenu.
Figure 11. DISC MENU Preference Screen Display NOTE: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original recorded language contained in the disc. d. Select ‘PARENTAL’ using UP/DOWN, then press RIGHT to enter the submenu. Figure 12.
Figure 13. PASSWORD VERIFY Input Screen Display Enter a 4 digit password, then press ‘ENTER’ to confirm the parental level setting. NOTE: For 1st time use the default password is 3308. e. Select ‘PASSWORD’ using UP/DOWN, then press RIGHT to enter the submenu. Figure 14. PASSWORD CHANGE Screen Display Press ‘ENTER’ to enter the Password Change Page. Input the Old Password or the Default Password, the New Password, and the Confirmed New Password. Press ‘ENTER’ to confirm the change. Figure 15.
NOTE: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs can not. f. Select ‘DEFAULTS’ using UP/DOWN, then press RIGHT to enter the submenu.
1.
2. MENU A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playing to display the menu, and press ENTER or PLAY to start playing. Some DVDs only allow you to select disc playback options using the DVD menu. 3. DISPLAY (Display contents vary from disc to disc.) 1) PLAYING TIME AND REMAINING TIME a.
c. Press ‘DISPLAY’ the 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in about 3 seconds. Figure 20. Chapter Elapsed Time Screen Display d. Press ‘DISPLAY’ the 4th time to display the Remaining Time for the chapter. The heading will disappear automatically after 3 seconds. Figure 21. Chapter Remaining Time Screen Display e. Press ‘DISPLAY’ a 5th time to exit. ‘DISPLAY OFF’ will be displayed and will disappear automatically after 3 seconds.
Figure 22. Angle Screen Display 3) SUBTITLE During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number (1) and the total Number of Subtitle Languages (2) displayed. If there are multiple languages press ‘SUBTITLE’ again to select another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘SUBTITLE OFF’ is displayed.
4) AUDIO During playback press ‘AUDIO’ to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the ‘AUDIO’ button is not pressed again for 3 seconds. Figure 24. Audio Language Screen Display *Some DVDs only allow access to this function through the DVD menu. 5) ZOOM During playback press ‘ZOOM’ to enlarge the picture by 1.
6) A-B REPEAT a. During playback press ‘A-B’ to set the Starting Point A. Figure 26. A-B Repeat Starting Point Screen Display b. Press ‘A-B’ to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. Figure 27. A-B Repeat Ending Point Screen Display c. Press ‘A-B’ a 3rd time to Cancel A-B Repeat. Normal play back will resume from Point A. Figure 28.
7) REPEAT a. During playback press ‘REPEAT’ once to repeatedly play the current chapter. Figure 29. Chapter Repeat ON Screen Display b. During playback press ‘REPEAT’ again to repeatedly play the current title. Figure 30. Title Repeat ON Screen Display c. During playback press ‘REPEAT’ a 3rd time to repeat all Chapters and Titles. The ‘REPEAT ALL’ screen will disappear automatically if the ‘REPEAT’ button is not pressed again for 3 seconds. Figure 31.
4. PLAYING AUDIO CDS When playing an audio CD. Press the DISPLAY button on the remote to display the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. a. During playback press ‘DISPLAY’ once and SINGLE ELAPSED will appear along with the current track playing and the time of that track. Figure 32. SINGLE ELAPSED Screen Display b. Press ‘DISPLAY’ (2) twice and SINGLE REMAIN appears along with the current track playing the and the amount of time left. Figure 33.
d. Press ‘DISPLAY’ four times and TOTAL REMAIN appears along with the current track playing and the amount of time remaining on the CD. Figure 35. TOTAL REMAIN Screen Display e. Press ‘DISPLAY’ a fifth times and “ DISPLAY OFF” will appear momentarily then disappear. The CD time Information will not be displayed. 1) USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: • TRACK- repeats the track that is playing.
1. Insert an MP3 CD, the DVD video player will initialize the disc and the directory (folder) will be shown on the TV screen. Figure 36. MENU Screen Display When an MP3 disc is inserted into the unit, the menu screen appears automatically. You can use the menu screen to change folders and songs. The system plays the songs in the order they were burned onto the disc. 1. Press the or button to choose a folder from the folder list on the left side of the screen. 2.
DISPLAYING THE TIME ELAPSED AND TIME REMAINING Press the ‘DISPLAY’ button on the remote to display disc information. The options below show you what happens when you press the ‘DISPLAY’ button. a)Press ‘DISPLAY’ once, and “SINGLE ELAPSED” will appear along with the amount of time the song has been playing. The actual amount of time the disc has been playing will be displayed on-screen. Figure 37.
NOTICE The upper left column is a list showing the name of folder. The upper right column is a list showing the name of song and the subfolder. “ “ sign in front of a file name indicates that this is a folder, not an MP3 file. “MP3” sign in front of a file name indicates that this is a MP3 file. During MP3 playback, you cannot access “PLAY MODE”, folders or songs. You are allowed a maximum of 11 characters for each folder or/ and songs.
H. Playing a Video Game (Refer to Figure 39) Plug the video output from your game system into the yellow video input jack(12) and the Audio output into the Audio input jack(13) on the Rear of the unit, which takes priority to the built-in DVD player. Adjust the volume control and the brightness control on the monitor for individual preference. Figure 39 I.
2. Connect the audio/video cable’s yellow plug into the DVD VIDEO OUT jack on the back of the unit, and the other yellow plug to the VIDEO INPUT jack on your TV or Monitor. J. Wired Headphones (Refer to Figure 39) Optional wired headphones may be used with the unit. Simply plug in the headset to either HEADPHONE 1 jack or HEADPHONE 2 jack on the left side of the monitor. NOTE: Plugging headset into Headphone jack disables external speakers. K.
L. Rechargeable Battery Installation and Use(optional) The player utilizes a set of long-life NiMH batteries for portable power supply. The NiMH battery pack is specially designed for your player, please consult your dealer for purchasing the battery pack VBP5058. NiMH batteries feature high storage capacity and low level of degradation. This means the NiMH batteries doesn’t have “Memory Effect” and thus can be recharged safely regardless of whether the battery is fully or only partially spent.
months or more, please recharge the battery at least once every two months to avoid irreparable damage to the battery. If the battery left attached to the player for an extended period, please recharge the battery at least once every two weeks. 4. Avoid unnecessarily recharging fully charged batteries. Installing the Optional Battery Pack: 1. First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected. 2. Close the player cover. 3.
Removing the Battery Pack: 1. First, make sure the player is in “Stop” mode and that the AC power supply has been disconnected. 2. Press the release button in the down direction. 3. Slide the battery towards the front of the unit. Figure 41.
12 MONTH LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2003 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y.
