User manual

Skybox Installation & User Manual
17
5 Installing the Antenna
NOTE
Once all four mounting brackets
are tightened and the antenna has
CAUTION
Make sure you are aware of the
new maximum height of the
Figure 5-10 Inserting bottom bracket.
Figure 5-11 Secure clamp with headscrew.
10. Insert the bottom bracket into the bracket
link (Figure 5-10).
11. Secure the bottom bracket with the appro-
priate head screw. Make sure that the cor-
rect head screw-bracket link combination
has been applied and as much of the rubber
on the mounting clamps are covering the
crossbars as possible.
12. Fully tighten the end head screw with the
supplied Allen wrench (Figure 5-11). Do
not overtighten.
vehicle (unloaded) with the antenna mounted
onto the roof rack. Use caution when driving
under overpasses, tree limbs, into garages
and into low clearance areas.
been mounted to the roof rack, complete a
thorough inspection of all four brackets to
ensure antenna is secure and stable.