Owner`s manual

4
5
Alarm Clock
Setting the Alarm
1. When the Survival Skybox is off, press and hold ALARM until the
clockashestoenterthealarmsettingmode.
2. Press
/ to set the time. Press and hold / to decrease or
increasethetimevaluequickly.
3. Press ALARM to confirm and exit.
Enabling/Disabling the Alarm
When the Survival Skybox is off, press ALARM to enable or disable
the alarm.
• Tosilencethealarmfunctionmomentarily,pressALERT/SN.The
alarmwillturnonagainwhenthesnoozeperiod(5minutes)is
over.
• Toturnoffanddisablethealarm,presstheALARMbutton.
• Ifyouwouldlikethealarmtoactivateagainthenextday,press
the ALARM button and the ALARM indicator will show on the
display.
Sleep function
Insleepmode,theunitwillturnoffautomaticallyafteraspecied
time (up to 90 minutes).
1. Press and hold the
button until you see “90” in the display.
Then press the button repeatedly to cycle through the
available durations for Sleep Mode (90, 80, 70, 60, 50, 40, 30, 20
or10minutes.)NotethattheSurvivalSkyboxwillautomatically
turnonwheninitiatingSLEEPmode,anditwillstayonforthe
duration of the selected Sleep time.
2. To cancel the sleep function, press the
button.
AM/FM/Weather Band Radios
The Survival Skybox lets you listen to local weather band, as well as
your local AM and FM radio stations.
To turn the radio on/off: Press the
button.
To change between AM, FM, or WB (weather band):PresstheBAND
button. The display shows which mode the radio is in: AM, FM, or WB
(weather band).
To increase or decrease radio volume: Turn the Volume knob left to
decrease or right to increase the radio volume.
Using AM/FM/Weather Band radio
To tune to FM, AM or Weather Band radio frequencies: Turn the
Tuningknobtogoupordownthrougheachradiofrequencywhile
in FM or AM radio mode. Turn the Tuning knob to scan through
frequenciesuntilyoundastationyouwouldliketolistenoruntil
you hear the weather information.
Alert Function
1. Press the button to turn on the Survival Skybox.
2. PresstheBANDbuttontoselectWB(weatherband)(Alert
function is not available in FM/AM mode).
3. PressandholdtheALERTbutton.“ALE”willbeshownonthe
displayandanALERTiconwillbeashingwhichindicatesAlert
mode is enabled.
4. WhenaNOAAalertsignalisreceived,theSurvivalSkybox
will switch on automatically and broadcast the Weather Band
information.
5. ToturnofftheAlertmode,pressandholdtheALERT/SNbutton.
5. Turn the volume on your phone to at least 3/4 max, then start
playing something on the phone. Control the Survival Skybox
volume on the Survival Skybox itself, using the Volume knob.
 NOTE:IfyounoticethesoundfromtheSurvivalSkyboxis
distorted, turn down your phone’s volume.
Reconnecting
When you turn it on, the Survival Skybox reconnects automatically
with the last paired device. When you leave the Bluetooth operating
rangewiththeSurvivalSkyboxturnedON,itdisconnects.When
you come back into the Bluetooth operating range, your device will
be re-connected.
Streaming Audio With Bluetooth
Once you’ve paired and connected your device with the Survival
Skybox, you can control music playback from the palm of your
hand. Select your music, stop it, change songs and playlists, all right
from your device’s screen.
To adjust volume: Turn the Survival Skybox’s Volume knob.
To disconnect from the Multi-Function Jobsite Radio:Eitherturn
Bluetooth off on your device or choose “Disconnect” from the list of
options in your device’s Bluetooth settings.
To reconnect with the Survival Skybox: Just turn the Survival
Skybox on and wait a few seconds for the Survival Skybox to find
andconnecttoyourdevice.IftheSurvivalSkyboxstillhasn’tfound
your device (which may happen if, for instance, another device has
been connected after yours) make sure the Survival Skybox isn’t
connected to another device currently. Then select the “Weather
Radio” from the list of Bluetooth connections available in your
device’s Bluetooth menu to connect to it.