Shuttle User Guide SIR-PNP1 128-6812 1 of 24
Congratulations You are one step closer to experiencing Sirius Satellite Radio. Sirius will revolutionize your in-home or vehicle entertainment with: · 100 streams of original programming, including – 60 streams of completely commercial-free music – guaranteed.
Contents User Preference Menu ..................................... 14 Sirius ID ........................................................ 14 Display Options ............................................ 15 FM Transmitter Option .................................. 15 Add or Skip .................................................... 16 Lock Options ................................................. 16 Edit Code ...................................................... 17 Audio Level ................................
Cautions and Warnings Shuttle System Components 1. Do not install the Shuttle in a position that hinders your view through the windshield, or obstructs viewing of the dashboard indicators and displays. 2. Do not install the unit where it may obstruct the operation or deployment of safety devices, such as airbags, etc. 3. Do not allow operation of the unit to detract from safe driving practices; remember that you are responsible as the vehicle operator to adhere to all safe driving and traffic regulations.
Introduction The Audiovox SIRIUS® Shuttle processes the satellite signals received by the externally mounted antenna (purchased separately as part of the Home or Vehicle Kits). The Shuttle recognizes and decodes the incoming SIRIUS® program information and provides an audio signal to your radio or other audio output equipment.
(a) Visit the website at siriusradio.com and click on the “JOIN” section. You will then need to follow some simple directions and provide Sirius with some basic information in order to activate your service. (b) Call Sirius at 1-888-539-SIRIUS (7474). One of our friendly Customer Care representatives will take the necessary information and walk you through the activation process.
Encoder Knob and Select ( ) Button: The encoder (ADJ) knob is the primary control for navigating through the various lists and option menus available on the unit. In the default mode, the encoder knob provides sequential tuning through the available program streams. When in the list mode, turning the encoder knob Counterclockwise (CCW) and Clockwise (CW) scrolls down and up, respectively, through the various menus and lists. The current selection from the list will be highlighted on the display.
Button for 3 seconds initiates preset scanning that will scan all banks, FAV-A, FAV-B and FAV-C in sequence. Preset scanning continues within that band until the user decides to terminate this function by pressing the Select Button. Tuning By Category When in Category Tuning Mode, each momentary press of the Category Up/Down Button(s) advances through the available Genres and preset banks: Category Mode - 1 Keypad Buttons 0-9 ( ): These buttons are used to directly enter a desired stream number.
When the default screen is displayed on the LCD, pressing the MODE Button will display all the available stream numbers and stream names. Listing - 1 Listing - 3 STREAM NAME STREAM NUMBER The second press of the MODE button will display all currently available song titles. Listing - 2 When the MODE button is pressed a third time, the Artist name is displayed on the LCD. While the preceding screens are displayed, rotating the encoder knob allows navigation through the list.
Direct Tuning Screen Setting/Using Stream Preset Buttons The unit contains 10 preset buttons. There are three banks of preset memory locations offering a total of 30 presets. These banks are designated FAV A, FAV B and FAV C. Each bank will store 10 user preferred streams. Select the desired stream you wish to save into memory by using the Encoder Knob or the direct tuning method or the category tuning method.
1. While the Shuttle is in either of the two standard display modes; momentarily pressing and releasing the MEMO button stores the current program data information within the Shuttle’s memory. A Memory Stored pop-up screen will appear for approximately 2 seconds confirming your selection has been saved. Large Character Screen MEMO - Memory Button (S-Seek Function): This feature allows the user to capture and store the current program data information (Stream Name & Number/Artist & Song title).
a. If one or more matches are found, a display list appears, and allows you to scroll through the list of songs using the 3. Each time the Shuttle is turned on, it automatically searches the incoming signal to determine if a match exists between the signal and the currently saved information stored in receiver memory. If one or more matches are found, a pop-up screen appears for 2 seconds and displays the Phrase “Matches Found”. An audible beep tone will be heard indicating that a match has been found.
overwriting a memory space with new information. Memory Full will flash on the display for 1 second, followed by a pop-up screen presenting the Replace-Cancel options. This prompt allows you to make the following Replace/Cancel choices: a. By selecting Replace, the S-Seek list will appear, and you can use the Rotary Encoder Knob (ADJ) rotary encoder to select the information that you would like to overwrite with the new Artist/Song Title.
User Preference Menu To enter the User Preference Menu, press and hold the MODE Button MODE for 3 seconds. The menu options list will appear on the LCD display. Menu Screen Using the selected function, the unit exits the menu screen function and reverts to the default screen display. Sirius ID Displays your 12 digit Sirius ID number. No adjustments are allowed in this mode. To exit this option, press the Select Button ( ) or Mode Buttton.
FM Transmitter Options The following adjustments are possible: FM On/ Off Upon entering this mode, rotating the Rotary Encoder Knob (ADJ) toggles between the FM ON or FM OFF function/display selection. To select and exit this function, press the Select Button ). (No button activity for 10 seconds will ( also exit this function.) “-” sign to the left and a “+” sign to the right. The current setting is indicated on the bar graph.
Add or Skip Upon entering this mode, a stream list shall be displayed with the current stream in play high lighted. Rotate the Rotary Encoder Knob (ADJ) to navigate the list and highlight the stream to be adjusted. Once a stream has been ) highlighted, pressing the Select Button ( displays the text “Skip” next to the stream, and prevents the stream from being accessible during any of the tuning modes.
to this menu and going through the same process to return the stream to the list). Upon adding a stream, the text “Lock” is removed from alongside the stream number/name. Lock Options Edit Code Upon entering this mode, the user is prompted to enter the current four digit numerical code being used to lock/ unlock stream access. Once the correct code has been entered, the user is prompted to enter the new 4-digit code.
Audio Level Upon entering this mode, a 10 segment horizontal bar graph is displayed with a “-“ sign to the left and a “+” sign to the right. The current setting is indicated on the bar graph. Rotating the encoder knob will adjust the bar graph audio level indication and audio gain, accordingly. To select and exit this function, press the Select Button ( ). (No button activity for 10 seconds will also exit this function.
Memory Options In this mode, the user can turn the Memory Search Function (S-Seek) ON or OFF. In addition, all 10 Memory Locations can be cleared. On the display, the top line displays the text, Memory Options. The following adjustment options are possible: 1. Automatic Memory Search function - On or Off. Use the Rotary Encoder Knob to select between the 2 options by highlighting the desired selection. Then press the Select Button to enter the option. 2. Clear all Memory Locations.
Factory Default The following adjustments are possible: Yes/No Upon entering this mode, rotating the encoder knob toggles between the “Yes” or “No” function/display selection. If “Yes” is chosen, the unit reverts to the original factory settings for the following parameters: All Presets revert to stream 184 Display dimming to 75% Display Contrast to 50% FM Modulator to “On” Confirmation Tones to “On” Audio Output Level to 50% Access to all skipped streams. (Locked channels remain locked.
Remote Control Unit 1 12 2 3 11 10 4 9 5 8 7 6 1. POWER - Turns the Shuttle on and off. 2. Presets 0-9- These buttons are used to directly enter a desired stream number. They are also used when entering and recalling preset stream numbers into memory. 3. DISPLAY- allows the user to choose one of three ways of presenting the Artist and Song title information on the LCD screen. 4. CAT- Used to access categories in descending order. 5.
Troubleshooting Specifications PROB AB L E C AU SE REMEDY Shuttle does not turn on Blown fuse, power cable not properly connected Check fuse check power cable Audio Output 650mV RMS Maximum (100-250 ohms) Check antenna display message Satellite antenna not connected Check satellite connection to Shuttle Fuse 3A Slow Blow Power Supply 10-16V, Negative Ground, DC Antenna or cable is faulty Contact system installer or vendor Dimensions FM modulator frequency contains static switch to another
12 MONTH LIMITED WARRANTY AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2003 Audiovox Electronics Corporation 128-6812 128-6812 24 of 24
