Installation Manual

128-9324
10 of 12
Page 10
SELECTABLE FEATURES
The selectable features of this unit can be set manually as explained on the previous page. Factory default settings are indicated by BOLD text. NOTE : The method of manual override can either be selected to operate from the valet switch or operate by custom code. Custom Code programming is found
in the owners guide
Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual. NOTE: Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated. Also, No data will be indicated if a feature is not available for a particular model. The unit will enter the feature but no selection will be available. RF Programmable Feature Bank 1 Is For Transmitter Programming See Transmitter Programming Guide. RF Programmable Features Bank 2 Is Alarm Selectable Features: Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps 1st DoorL/UL 1 Sec. 3.5 Sec. 1Sec. L, Dbl. U/L Dbl L, 1Sec. UL Dbl L, Dbl UL 1Sec. L/350mS ul 2nd Accy Lock Auto Lock On Auto Lock Off 3rd Accy. UL Auto UL On Auto UL Off 4th Passive Locks Passive Active 5th Pass/Act Arm Passive Arm Active Arm 6th Door Trigger Instant Delay 7th 1 or 2 Wire Disarm 1 Wire 2 Wire 8th Siren/Horn Siren/Horn Siren Only Horn Only 9th Horn Chirp 10mS 16mS 30mS 40mS 50mS 10th O/R Method Custom Code Valet 11th 14th L/UL Poll 120mS XOR 80mS XOR 120mS AND 80mS AND UL Dr & Pass UL Dr & Pass UL + Light UL + Light