User manual

4. Wait for the beep, and then repeat the sentences using a normal
tone of voice.
5. Repeat steps 1- when you are finished with a full session, you will
reach a screen that reads Adaptation Complete.
AUDIO MODES
You can control the level of audio guidance provided by the system. In prompt mode
(the default), the system prompts for required information. In readout mode, the
system prompts for required information and reads out the contents of the screen.
In expert mode, audio guidance is provided by beeps only.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “3. Audio Modes”.
3. Select “Expert Mode”, “ Prompt Mode” or “Readout Mode” by pressing
the Directional Key
up or down, then press the Left Soft Key
[OK].
SPEAKERPHONE
You can control how the system uses the speakerphone. Select Always on to have
outgoing audio play through the speakerphone. Select Always off to have outgoing
audio play through the internal speaker. Select Automatic to use the speakerphone
setting of the phone.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “4. Speakerphone”.
3. Select “Automatic”, “Always On” or “Always Off” by pressing the
Directional Key
up or down, then press the Left Soft Key
[OK].
ABOUT
When voice recognition is not confident it has recognized a name or number
correctly, it will show you a list of up to three choices. You can control when choice
lists appear.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
68 Chapter 4 − Menu Function
Voice ToolsVoice Tools
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “5. About”.
3. The ”Nuance VSuite 3.2“ version appears.
4. To return to the previous page, press the Right Soft Key
[Back].
VOICE COMMANDS INFO
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Left Soft Key
[Tutorial].
3. Voice Commands menu information appears.
4. To return to the previous page, press the Left Soft Key
[Skip].
Menu Function − Chapter 4 69
Voice ToolsVoice Tools
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 68-69081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 68-69 2008.11.3 5:5:21 PM2008.11.3 5:5:21 PM