User manual

1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. S a y “ Send Text <Name or #>”.
Examples: - “Send Text to Dee Harper’s Mobile“.
- “Send Text Tom Smith“.
- “Send Text to Tom Smith’s Mobile”.
- “Send Text to 617 555-1212”.
SEND PICTURE <NAME OR #>
Use the Send command to send a picture message to a specified name or number.
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. S a y “ Send Picture <Name or #>”.
Examples: - “Send Picture to Dee Harper’s Mobile“.
- “Send Picture Tom Smith“.
- “Send Picture to Tom Smith’s Mobile”.
- “Send Picture to 617 555-1212”.
LOOKUP <NAME>
Use the Lookup command to retrieve and display information for any name stored in
your Phonebook Entry list.
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. S a y “ Lookup <Name>”.
Examples: - Lookup Tom Jones.
3. The View Phonebook page will be displayed for that entry name.
GO TO <MENU>
Use the Go To command to open an application on your phone. You can say ”Go To”
by itself and be prompted to say the application name, or you can skip the prompt
by saying ”Go To” followed by the application name.
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. S a y “ Go To” followed immediately by one of the following items:
• Phonebook / • Recent Calls / • Messaging / • Neo Applications / • Settings /
• Neo Navigation
CHECK <ITEM>
The Check command lets you check status information for your phone. You can say
“Check“ or “Check Status“ to see and hear all status information.
66 Chapter 4 − Menu Function
Voice ToolsVoice Tools
1. You will hear “Say a command” and the Voice Commands menu will
be displayed.
2. S a y “ Check” followed immediately by one of the following items:
• Status / • Voicemail / • Messages / • Missed Calls / • Time / • Signal Strength /
• More Options (Network, Battery, My Phone Number, Volume)
VOICE COMMANDS SETTINGS
CONFIRMATION
You can control when the system asks you to confirm a name or number. You can
adapt the system to your voice for optimal recognition accuracy. During adaptation,
the system will prompt you to speak a series of short phrases. If you need to erase
adaptation data and set the system back to the factory default, select Reset Voice.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], “1. Confirmation”.
3. Select “Automatic”, “Always Confirm” or “Never Confirm” by pressing
the Directional Key
up or down, then press the Left Soft Key
[OK].
ADAPTATION
Voice Command is speaker independent, which means that no training or adapta-
tion is required. Some users with heavy accents or unusual voice characteristics may
find difficulty in achieving high accuracy with speaker independent Voice Command,
so the Adapt Voice feature allows users to dramatically improve the recognition
accuracy through adaptation. Users who get acceptable recognition accuracy will
find no additional benefit to performing the Adapt Voice adaptation.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key
[Menu], the Directional Key to select
“Utilities”, then slide out the QWERTY keyboard and press 1. Voice
Commands.
2. Press the Right Soft Key
[Settings], scroll to “2. Adaptation”, and
press the OK Key .
3. Scroll to select “1. Adapt Voice” or “2. Reset Voice” and press the OK
Key
.
• Adapt Voice: Requires that you make recordings of your voice to customize the voice
recognitions system. It will take a few minutes.
• Reset Voice: Once you finish the adaptation process, you can reset the adaptation to the
factory default settings.
Reset Voice menu option only appears after you finish the Adapt Voice process.
Menu Function − Chapter 4 67
Voice ToolsVoice Tools
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 66-67081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 66-67 2008.11.3 5:5:20 PM2008.11.3 5:5:20 PM