User manual

press 6. Bluetooth. Press the OK Key [OK] or select
“1. New Device”.
3. If the Bluetooth® power is switched off, the following message will
appear on the LCD screen: “TURN BLUETOOTH POWER ON?” Press the
Right Soft Key
[Yes].
4. The handset will prompt you with the following message on the LCD
screen: “PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE
MODE”. Press the OK Key [OK].
5. The device will appear in the “NEW DEVICE” menu. Press the
Directional Key
up or down to select the device you wish to pair
to, then press the Left Soft Key [Pair].
6. The handset will prompt you for the passkey. Consult the Bluetooth®
accessory (sold separately) instructions for the appropriate passkey
(typically “0000”—4 zeroes). Enter the passkey, then press the OK
Key
[OK].
You do not need to input the passkey for pairing when the passkey of the Bluetooth®
Headset or hands-free kit is 0000.
7. Once connected, you will see the device listed in the Bluetooth and
the Bluetooth® device connected icon will appear at the top of the
LCD screen when connected to the Bluetooth® device.
You can also check out the connection with an Arrow icon on the
Bluetooth.
• In the Bluetooth, you can disconnect the connected device with an icon by pressing
the OK Key [Drop]. Conversely, you can reconnect by pressing the OK Key
[OK] again.
• When an audio device is connected, you can select another device and the connection
is automatically transferred from that audio device to the other one.
• If multiple devices are displayed, select the devices you want to connect.
OPTIONS
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Settings”, then slide out the QWERTY keyboard and press
6. Bluetooth.
2. Press the Directional Key
up or down to select the paired device.
3. Press the Right Soft Key
[Options].
4. Press the Directional Key
up or down to select one of the
following options, then press the OK Key [OK].
• Remove Device: Removes a device from the pairing list.
• Rename Device: Renames a paired device.
60 Chapter 4 − Menu Function
SettingsSettings
• Service Discovery: To search for the services that the selected device supports.
• Send Picture: Send photos stored in Picture Gallery to a selected device.
• Device Info: Displays device information.
If ”Send Picture“ selected, FILE TRANSFER support only jpg(jpeg) file.
SETTINGS
MY PHONE NAME
To edit the Bluetooth® name of your phone:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key [Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 6. Bluetooth.
2. Press the Right Soft Key
[Options].
3. Press “1. My Phone Name”.
4. Use the numeric keypad to enter a new custom name.
5. Press the OK Key [OK] to save and exit.
DISCOVERY MODE
To set whether your device is able to be searched for by other Bluetooth® devices in
the area:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key [Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 6. Bluetooth.
2. Press the Right Soft Key
[Options].
3. Press “2. Discovery Mode”.
If Bluetooth power is not on, you will be prompted to turn it on in order to proceed.
4. Press the Directional Key up or down to select “On” or “Off”,
then press the OK Key [OK].
SUPPORTED PROFILES
To view brief descriptions of the profiles supported by the phone:
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key [Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 6. Bluetooth.
2. Press the Right Soft Key
[Options].
3. Press “3. Supported Profiles”.
4. Press the Directional Key
up or down to select one of the
Menu Function − Chapter 4 61
SettingsSettings
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 60-61081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 60-61 2008.11.3 5:5:16 PM2008.11.3 5:5:16 PM