User manual

1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key [Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 3. Phone Settings, 6. Security.
2. Enter the four-digit Lock Code, then press the OK Key
[OK].
The default lock code is “1234”.
3. Press “3. Reset Phone”.
4. After reading the warning message that appears, press the Right
Soft Key [Yes].
5. The phone will turn off and then back on again automatically.
NAM SELECTION
Enables Auto NAM (Number Assignment Modules) or manually selects a NAM.
AUTO NAM
Automatically switches phone to proper NAM when you have multiple NAM
registrations.
1. From standby mode, press the OK Key [OK] to unlock the
keypad, press the Left Soft Key [Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and
press 3. Phone Settings, 7. NAM Selection.
2. Press the Directional Key
up or down to select “1. Auto NAM”,
then press the OK Key [OK].
3. Select “On” or “Off”, then press the OK Key
[OK].
CHANGE NAM
1. From standby mode, press the OK Key
[OK] to unlock the key-
pad, press the Left Soft Key
[Menu], the Directional Key
to select “Settings”, then slide out the QWERTY keyboard and press
3. Phone Settings, 7. NAM Selection.
2. Press the Directional Key
up or down to select “2. Change
NAM”, then press the OK Key [OK].
3. Select “NAM 1 - MOVILNET” or “NAM 2 - MOVILNET” , then press
the OK Key
[OK].
CALL SETTINGS
ANSWER OPTIONS
To determine how to handle an answered call:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
56 Chapter 4 − Menu Function
SettingsSettings
press the Left Soft Key [Menu], the Directional Key to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 1. Answer Options.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
Slide Open/Any Key/Auto Answer/Send Key
• When the phone is closed, the Auto Answer Mode will not function.
• The Auto Answer Mode will function after about five seconds.
AUTO RETRY
To set the length of time the phone waits before automatically redialing a number
when the attempted call fails:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 2. Auto Retry.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
Off/7 Seconds/10 Seconds
TTY MODE
You can attach a TTY device to your phone enabling you to communicate with
parties also using a TTY device. A phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into characters and then displayed
on the TTY.
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 3. TTY Mode.
2. Press the Directional Key
up or down to select one of the
following settings, then press the OK Key [OK].
TTY Full/TTY + Talk/TTY + Hear/TTY Off
ONE TOUCH DIAL
To initiate a speed dial call by holding down the speed dial digit:
1. From standby mode, press the OK Key [OK] to unlock the keypad,
press the Left Soft Key [Menu], the Directional Key to select
“Settings”, then slide out the QWERTY keyboard and press 4. Call
Settings, 4. One Touch Dial.
2. Press the Directional Key
up or down to select “On” or “Off”, then
Menu Function − Chapter 4 57
SettingsSettings
081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 56-57081027_TXT8010_ELVIS_MV_M_EN_REV03.indd 56-57 2008.11.3 5:5:14 PM2008.11.3 5:5:14 PM