P-78 HIGH POWER DETACHABLE FACE ELECTRONICALLY-TUNED AM/FM/MPX RADIO WITH AUTO-REVERSE CASSETTE PLAYER, QUARTZ CLOCK AND CD CHANGER CONTROLS O WNER'S MA NUAL
INDEX Page Operating Instructions......................................................................1 - 5 Notes on Use of Front Panel ............................................................ 6 Setting the Clock .............................................................................. 6 CD Changer Controls....................................................................... 7-8 Specifications ...................................................................................
OPERATING INSTRUCTIONS 1 ON-OFF POWER BUTTON 3 DISPLAY SELECT BUTTON (SEL) Press this button to turn the unit on or off. The unit will also turn CLOCK on automatically when a cassette tape is inserted if the ignition switch is "on".
6 LOUDNESS CONTOUR (LOUD) To adjust the Loudness Contour, first select the Loudness mode NOTE: Release the button as soon as the display changes from frequency to time (approximately 2 seconds). Holding the button in for too long will put the unit into time setting mode (flashing time display). See section on “Setting the Clock”. 3 by pressing the Select (SEL) so that "LOUD" indication appears on the display panel. Within 5 seconds press either (+) for "On" or (-) for "Off".
appears on the display panel. Within 5 seconds of choosing the Fader mode, press the + or the - side of the Level Control to adjust the front-rear speaker levels as desired. When the level of the front and rear speakers is equal, "0-0" will be shown on the display panel. Adjusting the fader toward the front speakers will increase the number on the right side of the display to a maximum of “0-9” (full front).
bn STATION PRE-SET MEMORIES To set any of the 6 pre-set memories in each band, use the following procedure: 1. Turn the radio on and select the desired band. 2. Select the first station to be pre-set using the Manual Up/Down or Automatic Seek Tuning Controls . 3. Press the pre-set button to be set and continue to hold it in. After approximately 2 seconds, the display will flash, the volume will be momentarily muted and the pre-set button number (P1, P2, etc.
cl FRONT PANEL RELEASE BUTTON bs PROGRAM SELECTOR (PROG) To manually reverse tape direction and play the other side This button is used to release the mechanism that holds the front bq (program) of the cassette, lightly push both the Fast-Forward and Rewind buttons at the same time. The change of direction will be shown by the tape direction arrow on the display panel.
NOTES ON USE OF FRONT PANEL DETACHING THE FRONT PANEL 1. Make sure the front panel is right-side-up when attaching it to the chassis as it cannot be attached when up-side down. 2. Do not press very hard on the front panel when attaching it to the chassis. No more than light to moderate pressure should be needed. 3. When attaching the front panel, make sure the right side is correctly engaged before pressing the left side to lock it into position. 4.
CD CHANGER CONTROLS Backward Track Select button (TRK–), the next lower track number will be selected. cq CUE/REVIEW FUNCTIONS Built into this unit are controls to operate an optional CD changer. Please check with your Prestige car stereo specialist for recommendations of the models that will work with this unit. Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio and cassette play.
ct TRACK/DISC SHUFFLE (SHF) When the Shuffle button is pressed, the tracks on the disc will be played in a random, shuffled order (“SHF” will appear on the display panel). The Track Select button cp will also select tracks in the shuffled order instead of the normal progression. When all tracks on the disc have been played in shuffled order, the next disc will be selected in normal order and its tracks played in shuffled order.
SPECIFICATIONS: Size: Operating Voltage: Output Power: Output Wiring: Output Impedance: Tuning Range: Sensitivity: FM Stereo Separation: Tape Frequency Response: Tape S/N Ratio: Wow & Flutter: 7" W x 2" H x 6-1/8" D 178mm x 50mm x 155mm 12 volts DC, negative ground 160 watts maximum (40 watts x 4 channels) Floating-ground type designed for 4 speaker use. The amplifiers in this unit are NOT designed for use with 2 speakers Compatible with 4-8 ohm speakers AM: 530 - 1,710 KHz. (10 KHz. step) FM: 87.5 - 107.
CARE AND MAINTENANCE The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual for future reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system. CASSETTE CARE: 1.
12 / 24 MONTH LIMITED WARRANTY Applies to automotive radios, radio/tape players, radio/CD players, CD changers, power amplifiers, equalizers and accessories.
© 2000 Audiovox Corporation, Hauppauge, N.Y.
