VM9512HD BAND AS Multimedia Receiver DISP CLOSE Installation and Operation Manual ANGLE / TILT PICTURE Enter Press Audio VM9512HD video 240 Watts Peak Watts en Crête Vatios el Máximo 60W x 4
CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9512HD Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation ..........................................................
ii
VM9512HD PREPARATION Congratulations on your purchase of the Jensen VM9512HD Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9512HD installed by a reputable installation shop.
VM9512HD Optional Equipment Tools and Supplies • You will need these tools and supplies to install your VM9512HD: • • • • NAV101 The VM9512HD is "navigation ready." Before accessing any navigation features, you must purchase and install the NAV101 module. All installation and operating instructions will be included with the NAV101 navigation module. Once the NAV101 is connected and operating properly, the NAV source mode will become active.
VM9512HD WIRING DIAGRAM the MediaLink and Satellite Connections diagram for more information * See about connecting a satellite receiver and an iPod (through the MediaLink). MediaLink Bus SAT Radio SAT L SUB.
VM9512HD MEDIALINK AND SATELLITE CONNECTIONS HD RADIO MODULE Compatible SAT Tuners: 1. XMD1000 (requires XMC or XMDJEN100 Cable Kit) 2. CNP2000UC * Requires Gen 5.5 or earlier photo or video iPod. iPhone, iPod Touch, iPod Classic and iPod Nano with video will only play music files.
VM9512HD INSTALLATION Pre-installation 1. Press the metal levers on both sides to remove the halfsleeve from the radio. PREPARE RADIO FINAL INSTALLATION CAUTION! Be careful not to damage the car wiring. 3. 4 5 Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. 1 Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal.
VM9512HD ANTI-THEFT FEATURE The VM9512HD is equipped with an anti-theft feature requiring the user to enter a password upon initial power on. 3. Touch the keypad icon next to the blue box in the “Password” field to open the on-screen keypad. 02:40 AM RADIO Enter Password: 1 2 3 General RDS 4 5 6 7 8 9 Rating Demo Hardware 0 SETUP Language Audio Password Rating 8. Adult Load Factory Reset P.VOL TS Cal Entering the Default Password The default user password is 012345 (6 digits).
VM9512HD CONTROLS AND INDICATORS Button Operation 1. OPEN/CLOSE 4 3 BAND AS 7 2 1 Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. DISP With the TFT monitor open, press to cycle through information available on the TFT screen. With the TFT monitor closed, press and hold to view the clock. In DVD Mode, press to view the top and bottom information bars. Press again to turn “Display Off”.
VM9512HD CONTROLS AND INDICATORS 13.Pause/Play/Enter 4 Press to pause or resume playback or to confirm current selection. 7 3 2 1 14. (right joystick) DVD/Disc Mode: Press once to enter the next chapter or track. BAND TUNER Mode: Press once to auto-search the next available radio station. Multimedia Receiver AS DISP CLOSE MENU Mode: Press once to move the cursor to the right. 15. (up joystick) DVD/Disc Mode: Press once for fast forward/fast reverse.
VM9512HD REMOTE CONTROL The VM9512HD Remote controls both the front and rear zones. To switch from front to rear zone, move the F/R switch (32) located on the right side of the controller. 30 8 4 35 31 14 16 18 17 19 15 32 2 3 22 1 13 11 5 9 12 24 23 28 25 20 21 10 27 29 26 6 7 33 34 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only.
VM9512HD Table 1: Remote Control Functions Button Name Function Ref# DVD VCD TUNER CD/MP3 SATELLITE MENU 1 Enters the main menu of the disc Turns on/off PBC when playing VCD Displays diagnostics screen TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title Category list in CG mode iPod Displays iPod menu MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output T
VM9512HD Table 1: Remote Control Functions Button Name Function Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod ||>/BAND 23 Slow Forward/Slow Reverse X2, X4, X8 Slow forward X2, X4, X8 Selects AM/FM Band.
VM9512HD USING THE TFT MONITOR Open/Close TFT Monitor Monitor Left/Right Angle Adjustment Aspect Ratio Open TFT Monitor To manually adjust the left/right angle of the TFT screen, follow these steps: Press the WIDE button (28) on the remote control or WIDE button (22) on the monitor to adjust the aspect ratio as follows (only active with video source): Press the OPEN button (1) on the front panel or press the ( ) button (25) on the remote control to activate the mechanism that moves the display panel i
VM9512HD Parameter Adjustment Procedure 1. Enter Picture Quality Setting Mode: Press the PIC button (24) on the remote control or press and hold the WIDE/PICTURE button (22) on the monitor. 2. Select Item to Set: Use the up/down joystick buttons to select “BRIGHT” or “CONTRAST”. 3. Set Parameters: Use the left/right joystick buttons to modify the settings. 4.
VM9512HD OPERATING INSTRUCTIONS Power On / Off Press the /SRC button (6) on the unit (or the /POWER button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen. Press and hold the button to power off the unit. The monitor is drawn back into the main compartment.
VM9512HD This menu allows you to select a source for the front or rear zone. Touch FRONT or REAR to choose the zone for which you would like to specify the source. (See “Multi-ZONE Operation” on page 17.) 3. Use the joystick to adjust the selected feature to the desired setting. Function EQ Adjustment Options User In user mode, you can manually adjust each of the seven frequency bands. Acoustic Use the on-screen arrows to select a predefined equalization curve.
VM9512HD System Reset To correct a system halt or other [RESET] Button illegal operation, use the tip of a pen to press the reset button (12) located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings. NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete.
VM9512HD MULTI-ZONE OPERATION Independent sources can be played simultaneously on the VM9512HD. For example, a video game console can be seen on the front screen while DVD video is available to rear passengers. Multi-Zone Limitations DVD and SD Card sources cannot be selected for simultaneous Front / Rear operation. For example, if DVD is selected as the Rear Zone source, then SD Card cannot be selected as a Front Zone source.
VM9512HD SETUP MENU To access system settings, press the SETUP button (31) on the remote control or touch the button on the screen to enter the “SETUP” menu. The “GENERAL” sub-menu appears highlighted in blue. 02:40 AM RADIO General RDS Rating SETUP Language Audio Clock Mode Speaker Bluetooth Demo 04 : 31 AM Hardware Video Input AUTO Beep Touch the sub-menu name or use the joystick to select a submenu (Language, Audio, RDS, etc.).
VM9512HD Bluetooth Sub-menu Features Setting Bluetooth Auto Answer Connect Options On Function Enable Bluetooth function. Off Disable Bluetooth function. On The unit automatically answers all incoming calls. Off Manually answer calls by touching the “call” button. Manual Connect the last active mobile phone by touching the CONNECT icon when disconnected. Auto Automatically connect when your paired phone is in range.
VM9512HD P.VOL Sub-menu Features Setting Source Options DISC RADIO SD SAT AUX 1 Function Choose a source for which you would like to increase the relative volume (LEVEL). Use the +/- buttons to increase or decrease relative volume for specified source up to 6 decibels. USB BT AUX 2 iPod NAV TS Cal (Screen Calibration) To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option. After entering calibration mode, a crosshair appears in a corner quadrant of the screen.
VM9512HD TUNER OPERATION About HD Radio™ Technology HD Radio technology allows CD-quality digital broadcasting of your local AM and FM radio stations. HD Radio broadcasts can include multiple channels on the same frequency, which is called multicasting. With multicasting, you can receive up to eight additional multicast channels: HD1~HD8. With your VM9512HD radio, you will receive HD Radio digital broadcasts automatically when tuned to a station that offers HD Radio technology.
VM9512HD screen without changing the station, touch Exit. To clear your entry and start over, touch Clear. HD Radio Multicast Channels To tune to an HD Radio multicast channel, tune to the main signal and then press the PROG button (20) on page 2/2 . If a Multicast channel is being broadcast for the current station, the corresponding multicasting number appears on the left side of the screen. To view the title and artist, if available, select HD-1, HD-2, HD3, etc. RADIO FM 106.
VM9512HD SATELLITE RADIO OPERATION Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels without activation. Accessing Satellite Radio Mode Press the SRC button (8) on the front panel or remote control (8) to switch to the SAT source.
VM9512HD SAT E Q R E A R SAT1 XM Preview 01:02 CH001 Preview ######## 001 XM Preview CH 004 The 40s P I P 005 The 50s CG 006 The 60s CAT 007 The 70s Title: www.xmradio.com • • • • • SCN MEM DIAG While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of stations. Each page contains six channels to select from.
VM9512HD DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally. Controlling Playback Repeat Playback To access the on-screen controls, touch the screen.
VM9512HD Press the TITLE button (2) on the remote control or on screen to select a different title for playback. Press the ENTER (joystick) button to confirm your selection and begin playback. You can also select a title using the touch screen. Moving Through Chapters Enter the desired title, chapter/track, or time using the onscreen number pad and then press the Enter button. To exit the screen without making a selection, touch Exit. To clear your entry and start over, touch Clear.
VM9512HD General Disc Information Table 6: Disc Properties Symb ol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Table 7: Disc Symbols Symbol Meaning Number of voice languages recorded.
VM9512HD DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VM9512HD will play music or other audio files from the following disc media/formats: • • • • • CD-DA CD-R/RW DVD DVD+R/RW DVD-R/RW 18. Upon inserting a disc with the TFT screen open, the disc and track title (if available), along with the track number and playing time appear on the screen.
VM9512HD MP3/WMA OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. NOTE: When burning MP3 / WMA files onto a DVD disc, use the 2X or 4X burning option, if available. This slower burning speed will help eliminate buffer errors and increase disc reading reliability. Also, use folders when burning large numbers of songs / files to a disc for easy music navigation.
VM9512HD MP3 User Interface The on-screen indicators and touch key areas for MP3 playback are outlined below. 17 16 DISC E Q R E A R P I P 1 2 3 4 5 6 20 2 1 18 14 3 01:02 AM (Root) MP3 4/84 00:00:23 15 Cherry Poppin Da Chris Isaak - Baby Crazy Town - Butt Phish - Birds Of A Phish - Bouncin' R Phish - Freebird (L 10 8 9 5 11 7 19 20 24 22 23 ALL DIR - 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
VM9512HD iPod OPERATION iPod User Interface Controlling Your iPod Photo Playback The on-screen indicators and touch key areas for iPod playback are outlined below. The unit will automatically switch to iPod mode when an iPod While iPod photos can be viewed on the VM9512HD screen, you must use the iPod to control photo playback options. 15 16 iPod E Q R E A R P I P 0001 0002 0003 0004 0005 0006 17 2 1 18 is plugged into the MediaLink .
VM9512HD Direct Track/File Entry To select a track/file directly, touch the button on screen control to display the direct entry menu. TRACK: _ _ / ## 1 2 3 4 5 6 7 8 9 Exit 0 Clear Enter the desired track/file using the on-screen number pad. Press the Enter button to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear. You can also use the numeric keypad (29) on the remote control to access files directly.
VM9512HD BLUETOOTH OPERATION About Bluetooth Bluetooth is a short-range wireless radio connectivity technology that is developed as a cable replacement for mobile phones, handheld PCs and other devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp.
VM9512HD Pairing the Bluetooth System with Your Mobile Phone and Head Unit Answering an Incoming Call 1. For best reception, speak loudly and clearly. The microphone is located on the left side of the unit. 2. Press the button (8) to initiate the pairing process. Keep the mobile phone within 2 meters of the head unit when pairing. (To terminate the pairing process, press To answer the call, touch the the button again.
VM9512HD Phone Book 1. Touch the Phone Book menu option to display the phone book stored on your mobile phone, if compatible. The screen will display “Ready...” while the phone book is downloading. 2. Once the download is completed, you can use the arrow buttons and scroll bar on the right side of the window to navigate the list. Since the unit downloads one page of entries at a time, there may be a slight delay while the next page of numbers is downloaded. 3.
VM9512HD TROUBLESHOOTING Table 8: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Remote control does not function No/low audio output Poor sound quality or distortion Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front panel Battery depleted Replace battery with new one Battery installed incorrectly Remove batt
VM9512HD Table 8: Troubleshooting Problem Disc does not play back Cause Corrective Action Disc is warped or scratched Use disc in good condition Disc is dirty or wet Clean disc with soft cloth Laser pickup is dirty Clean laser pickup with cleaning disc Incompatible disc is used Use compatible disc Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction Disc region code is not compatible with unit Use disc with proper region code Disc is inserted upsi
VM9512HD Care and Maintenance 1. 2. 3. 4. 5. 6. 7. 8. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in scratching or discoloration. Do not get water or cleaning fluids on the unit. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again.
VM9512HD SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD+R / RW (Single and Dual Layer) and CD-R / RW Compatible Formats: CD-DA, MP3, WMA, VCD, SVCD, AVI, MPEG1 / 2, XviD and Kodak picture CD (JPEG).
VM9512HD 40
Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions. Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada.
Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2008 Audiovox Ver.
• Choose from over 2 million songs • Transfer to your iPod or other digital audio player • Burn unlimited CDs • No confusing restrictions — own your music To redeem go to: www.eMusic.com/aem Get up to 35 music downloads with a free 14-day eMusic trial subscription. Offer available to first-time eMusic customers only. Credit card required. Offer and eMusic prices are subject to change without notice and are subject to eMusic's Terms of Use. eMusic is a registered trademark of eMusic.com Inc. in the U.S.A.
