Owner's Manual
Table Of Contents
- Installation Guide
- Table of Contents
- Supplied Accessories
- Installation
- Tools Required / Preparation
- Installing the Snap-On Shroud
- Installing the Snap-On Screen Cover
- Installing the Trim Ring
- General Vehicle Installation Approach
- Vehicle Preparation
- Connecting the Dome Lights
- Installing the Mounting Bracket
- Wiring Diagram
- Mounting the Unit
- Removing the Screen Back Cover
- Removing the Trim Ring and Shroud
- Installing the Optional Thick Trim Ring
- Installing the Optional SmartStream Module (WM1)
- Troubleshooting
- Owners Manual
- Warranty
30
USB1 Port(User Accessible)
The USB port provides two functions:
1. Media port for USB thumb drives:
2. charging:
t The USB port will not charge a portable device when the unit is turned OFF.
t The USB port will charge a portable device in the following modes:
t DVD/USB (Not recommended)
t AV
t AUX
t HDMI/MHL
t It will not charge in USB mode.
t For Apple /Android Mobile , It will charge at up to 2 Amps of charging current.
t For Samsung Mobile, It will charge at up to 500mA of charging current.
USB2 Port(Hidden Input for when remote HDMI/USB Harness HDH12 is Installed)
1. The USB port charging only.
2. .BY$IBSHJOHDVSSFOU
For Apple /Android Mobile , It will charge at up to 2 Amps of charging current.
For Samsung Mobile, It will charge at up to 500mA of charging current.
3. Charging is available in all source.
USB2 is not a source, so it can’t be selected in the Main Menu or Source.
USB Inputs