Owner's Manual
Table Of Contents
- Installation Guide
- Table of Contents
- Supplied Accessories
- Installation
- Tools Required / Preparation
- Installing the Snap-On Shroud
- Installing the Snap-On Screen Cover
- Installing the Trim Ring
- General Vehicle Installation Approach
- Vehicle Preparation
- Connecting the Dome Lights
- Installing the Mounting Bracket
- Wiring Diagram
- Mounting the Unit
- Removing the Screen Back Cover
- Removing the Trim Ring and Shroud
- Installing the Optional Thick Trim Ring
- Installing the Optional SmartStream Module (WM1)
- Troubleshooting
- Owners Manual
- Warranty
18
The Setup Menu contains features and options that let you customize your DVD player.
'PSFYBNQMFZPVDBOTFUBMBOHVBHFGPSUIFPOTDSFFOEJTQMBZPSTFUVQ1"3&/5"-
controls to control DVD playback for children.
Using the System Menu
1. Press the System Menu button on the remote. The System Menu appears on the
screen as shown in the figure below. There are 6 icons that will appear individually in
the upper left hand corner of the System Menu as each option is selected.
.
2. To select the desired setup option, move the highlighted (in blue) option using
the up/down ( ) cursor buttons. Press the right ( ) cursor button to access the
options on the right hand side of the screen.
3. After entering the setup area (on the right side of the screen), highlight the desired
option using the up/down ( ) cursor buttons.
1SFTTthe right ( ) cursor button to toggle the sub menu that contains the different
options available.
3FQFBUTUFQTBOEUPTFUUIFPQUJPOTGPSFBDIPQUJPOPOUIFTBNF4FUVQ1BHF
6. To change to another Setup page, press the system menu cursor button to the icon
side of the setup page. Then, repeat steps 2 through 5.
PICTURE
AUDIO Setup
SYSTEM Setup
PLAYER Setup
FMM Setup
SMART STREAM
PICTURE
AUDIO
SYSTEM
PLAYER
FMM
SMART STREAM
ADJUST EXIT
BRIGHTNESS
CONTRAST
COLOR
TINT
MOVE
16
16
16
0
MENU
System Menu Setting and Adjustments










