MMD85A 8.5” OVERHEAD LCD MONITOR WITH DVD PLAYER ON PO WER SO U RCE SC REEN MO D E OF F A UT O STO P EJEC T PL AY OPERATION MANUAL 128-7460 1287460.
Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
Congratulations on your purchase of the Movies 2 Go MMD85A drop-down Video Monitor with DVD Player. The MMD85A has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM 6 1 1 2 7 8 9 10 3 4 5 ON POWER SOU RCE SCR EEN MO DE OF F A UT O STO P EJEC T PLAY 11 AUX 14 15 12 13 4 1287460.
MAIN FUNCTION DESCRIPTIONS 1. Dome Lights – Provide additional interior illumination. 2. Infrared Transmitter and Sensor – Used to transmit audio to wireless headphones. Also allows the remote control to operate the MMD85A and to control other accessories in the system. 3. Source Button – Source select DVD, AV1, AUX. 4. Screen Mode Button ( ) – Allows the user to change screen format ( Aspect Ratio 4:3 or 16:9 ). 5. Power ON/OFF Button ( 6. DVD disc insertion slot 7.
Remote Control Operation 18 17 1 19 2 20 3 4 5 6 21 22 Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. 2) Install two “AAA” batteries. Make sure that proper polarity (+ or -) is observed. 3) Align the cover tabs with the remote control and press until the cover clicks. The remote control will operate the MMD85A.
Operation with Remote Control * Function control is available on the unit and the Remote Control. 1. * POWER Press this button to turn “ON” and “OFF” the MMD85A. 2. DISPLAY Press to display current disc information while the disc is playing. Press cursor ( buttons to select from: ) Title Chapter Angle Audio Subtitle For Title/Chapter, press numeric buttons to do Title/Chapter selection. For Angle, Audio & Subtitle, press the Enter key repeatedly to change the options.
6. ZOOM Press this button to zoom the picture when playing a DVD disc. Press ZOOM button Once Twice 3 times 4 times DVD player perform Enlarge the picture 2 times the original size Enlarge the picture 3 times the original size Enlarge the picture 4 times the original size Picture is returned to original size 7. CURSOR ( ) Use these buttons to access menu selections on the screen. 8. MENU Allow the user to access the disc menu. 9. RETURN Not used in this model. 10.
12. VOLUME UP (+) Press to increase the volume level of the wired headphone jacks. It is also used to make picture adjustments in the picture select mode. Note: The volume buttons will not affect the volume of wireless headphones or the FM modulator. When using these devices, the volume must be adjusted with the wireless headphone volume control or with your radio’s volume control.
14. PIX ( Picture Select ) Each time this button is pressed, the on screen picture adjustment displays the “adjustment bar” for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME+/ VOLUME- button to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or is any other button is pressed. 15. PAUSE (II) Press to pause playback 16. * STOP ( ) Press to stop playback 17.
22. MUTE Press to mute the audio. Press it again to restore the sound to the previously set level. 23. ENTER Press to implement selected settings. 24. SETUP Press to display the Setup Menu which allows the user to change the DVD player options such as TV DISPLAY, OSD LANGUAGE, EQ TYPE, PARENTAL CONTROL etc. Refer to the settings and Adjustments section for more information. 25. REPEAT Allow the user to repeat the playback in various options. Press repeatedly to change the options. 26.
Settings and Adjustments The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display, limit playback for children, load default settings for the picture quality and DVD players etc. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown in the diagram.
LANGUAGE SETUP Language for On-Screen Display OSD MENU : The OSD MENU setup allows you to select the language for the on-screen display. The user can either select English, French, Spanish, Italian or German for the OSD language. L an g ua g e O SD M en u V id e o R a ting E ng lish E ng lish Fre n ch Span is h Italia n G erm a n V id e o R a ting VIDEO SETUP TV DISPLAY The TV DISPLAY setup allows you to adjust screen setting (aspect ratio).
TV TYPE The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected. NTSC - Select this type for NTSC TV PAL - Select this type for PAL TV MULTI - Select this type for multi-system TV L an g ua g e TV D ispla y TV Ty pe V id e o 1 6:9 NTSC R a ting NTSC PA L M U LTI RATING SETUP PASSWORD After you selected the password change, use the numeric buttons to key in the default password (3308), then press Enter.
LOAD FACTORY The Load Factory Reset allows you to reset all options to factory settings. * This function will not affect the Parental Rating control settings. L an g ua g e P ass w o rd R ating V id e o A dult R es et 15 MMD85A 1287460.
Playing DVDs 1. Press the DISPLAY Button on the remote control to display the status banner. 2. Selecting a chapter. You can skip to a specific chapter by using the numbers keys. For example, if you want to skip to chapter 2, press “02”. 3. Using the Repeat Feature The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options : • REPEAT CHAPTER Repeat the chapter that is playing. • REPEAT TITLE Repeat the title that is playing.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. Press DISPLAY button on the remote to display the time counter display elapsed only.
Skipping Songs Use the Next ( ) button on the remote control to move to the next song. Use the Previous ( button to move to the previous song. ) Selecting a Play Mode You can choose what order the songs will play on a disc temporarily. The default play mode is FOLDER. Press REPEAT consecutively to choose the desired play mode. The play mode options are: • FOLDER • SHUFFLE • • • • Plays the songs in a folder in the order they were recorded.
TURNING THE MMD85A ON OR OFF 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3.
OVERHEAD DOME LIGHTS The Dome Lights integrated into the MMD85A are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle’s interior lighting. Refer to the installation Guide for wire connections.
ACCESSORIES WIRELESS HEADPHONES (Optional) The MMD85A includes a built in infrared transmitter for use with Movies 2 Go wireless headphones (PN MMIRHS). Turning the Wireless Headphone switch ON will activate the internal IR receiver and the volume can then be adjusted separately with the controls on each headset. Any number of wireless headphones can be used, but all must be within direct line of sight from the transmitter.
SOURCE FEATURE AV1 The video input may be connected to a Video Cassette Player (VCP), video game system, or other audio/video devices. To access the A/V inputs, turn the MMD85A on, press the source button on the MMD85A or the Source button on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The MMD85A is now ready to play the audio and video signals from the source connected to AV1 input.
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION”. Types of Discs your DVD will play • • • DVD disc - DVD discs which contain video.
Troubleshooting PROBLEM SOLUTION • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not IR sensor inoperative obstructed. Disc won’t play • Insert a disc with the label side facing up. • Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. • Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. This DVD player is set to Region Number 1.
PROBLEM SOLUTION Can’t advance through a movie • You can’t advance through the opening The icon ( ) appears on screen credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4.
Replacement Parts Specifications Remote Control 1364057 LCD Backlighting Edge Light Tube A/V Adapter Cable 112B3227 Resolution 1440 x 234 Pixels 336,960 Operation Temperature 32-140°F ( 0-60°C ) Storage Temperature -4-176°F (-20-80°C) Backlight life 10,000 Hours Video Display System NTSC/PAL Headphone Audio Output 0.03W@32 ohms Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimensions H x W x D Inches 1.8 x 10.2 x 8.8 (45.7 x 260 x 223.5mm) 26 1287460.
12 M O NTH LIM ITED WAR RANTY AU D IOV O X ELE CT RO N ICS CO R P. (the C om pany) w arrants to the original retail purchaser of this product that should this product or any part thereof, under norm al use and conditions, be proven defective in m aterial or w orkm anship within 12 m onths from the date of original purchase, such defect(s) w ill be repaired or replaced w ith reconditioned p roduct (at the C om pany's option) w ithout charge for parts and repair labor.
