MMD7HRB MMD7HRT MMD7HRG Two Specific Vehicle Headrests With 7" LCD Monitors and Built-In DVD Player for Rear Seat Entertainment POWER AUX SOURCE SCREEN MODE POWER PLAY STOP AUX SOURCE SCREEN MODE Installation Guide 128-8658
IMPORTANT MATERIALS INCLUDED IN THIS PACKAGE: 1) MMD7HRB, MMD7HRT, MMD7HRG System Monitor MMD7HRM Master Monitor with DVD Player (1pc) MMD7HRS Satellite Monitor (1pc) MMD7HRM POWER AUX SOURCE SCREEN MODE PLAY STOP Master Monitor (M1) MMD7HRS POWER AUX SOURCE SCREEN MODE Satellite Monitor (SM) 2
2) Interface Harness 2) Universal Remote Control (P/N 136-3785) – (1pc) (P/N 136-3977) - (1pc) 3) AV Adapter Cable 4) 2 Pin DC Power Cable (P/N 112B3227) - (2pc) (P/N 112-3667) - (1pc) 5) Post Tube 12MM 6) Post Tube 14MM (P/N 100-2508) - (2pcs) (P/N 100-2509) - (2pcs) 7) Wired Headphone (P/N 136-3758) - (2pcs) OPTIONAL ACCESSORIES: 8) Infrared Channel Wireless Headphones 3
MMD7HRB, MMD7HRT, MMD7HRG SYSTEM OVERVIEW 1) The SYSTEM is a versatile audio / video system with built-in DVD player (MMD7HRM only) which includes two monitors, that can accept an Audio / Video input and independent AUX input. A separate audio output is provided for connecting an optional FM Modulator to the vehicle's radio. 2) The M1 Monitor (MMD7HRM) is comprised of a 7" TFT LCD monitor with built-in DVD player that allows the user to playback DVD, and the AUX source.
9) Pivot the screen until a comfortable viewing angle reached. The internal lock limits the screen to a maximum adjustment of 30 degrees from closed position, the headrest itself can be tilted forward to help achieve a comfortable viewing position. Inner Ring Internal Lock Closed Position 10) Insert disc Disc Label Insert disc 30 degrees MMD7HRM Monitor only. 11) Eject disc Eject disc MMD7HRM Monitor only.
Headrest Installation Description Choose the headrest cover color to best match your vehicle interior.
3 4 Use a screwdriver to tighten the screw after headrest support have been adjusted.
VEHICLE PREPARATION: 1) Read the manuals and get familiar with the electrical requirements and connections. 2) Prepare the vehicle by removing any interior trim necessary to gain access to the vehicle's wiring as well as all areas where interconnecting wire harnesses will be located. (Refer to the Installation Procedure).
7) Connect all the components together (electrically) and verify proper operation of all the system functions. a. The headrest DIN cables and the Interface Harness DIN cables are color coded. Connect each headrest cable to the correct color cable on the Audio interface harness. In some vehicles it will be necessary to use the supplied DIN extension cables to reach from under one seat to the other seat. The DIN extension cables can be used for either the MMD7HRM or MMD7HRS monitors.
MMD7HRPKG WIRING DIAGRAM MMD7HRS Monitor Satellite Monitor MMD7HRM Monitor Master Monitor POWER POWER AUX SOURCE AUX SOURCE SCREEN MODE PLAY STOP SCREEN MODE DIN Extension Cables (Optional) BLUE Interface Harness DIN Extension Cables 10 YELLOW GREEN RED
www.mobile.audiovox.com © 2008 Audiovox Electronics Corp.
