Installation guide

4
Installing The Snap On Covers
Begin by hooking area “A” (above) over the dome light and slide the cover over the pod. The
cover will snap in place.
Installing The Shroud
Place the pod on a soft surface to avoid damaging the plastic.
1. 2. 3.
Housing
Snap On Cover
(Shroud)
1 Pewter, 1 Shale
Pry Tool
(A)
catch catch
Work on a soft surface to avoid damaging the plastic.
Insert the supplied pry tool between the Housing and Snap On Cover (Shroud), then press
the pry tool to release the Snap On Cover (Shroud).
Removing The Snap On Cover (Shroud) From The Housing
1 2 3