MMD11 11" OVERHEAD LCD MONITOR WITH DVD PLAYER OPERATION MANUAL 128-8290
Important Notice Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants.
FEATURES Congratulations Congratulations on your purchase of the Jensen MMD11 DVD Player with Drop-Down Video / Monitor. The MMD11 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 8 7 6 5 43 2 1 1. EJECT () Button This Button is used for ejecting discs from the disc compartment when the source is DVD and the unit is powered up. 9 10 2. STOP (n) Button This button is used to stop playback. 11 3. Source Select Use to select one of the three sources: DVD, AUX,AV1. 12 4. Picture Select (+) To increase the level of selected picture controls. 13 5. Picture Select Button Allows the user to enter the picture adjustment mode. 14 6.
CONTROL FUNCTION DESCRIPTION (FRONT VIEW) CONTROL FUNCTION DESCRIPTION (SIDE VIEW & BACK VIEW) 9. POWER ( ) Button Used to turn the system on/off. Side View 1 10. Dome Lights Provide additional interior illumination. 11. Infrared Transmitter and Sensor Transmits audio to optional wireless headphones. Also allows the remote control to operate the MMD11 and to control other accessories in the system. 1. DVD Disc insertion Slot For loading and removing discs.
REMOTE CONTROL OPERATION MAIN FUNCTION DESCRIPTION 1 2 3 4 5 POWER MONITOR SELECT EJECT 35 M1 M2 TV DVD 1 2 3 4 5 6 7 8 SOURCE AUTO MEMORY 6 34 SKIP/ SEARCH 7 ERASE/ WRITE 8 9 10 11 12 13 0 CHANNEL FMM ON/OFF SELECT DAY/ NIGHT PIX RETURN DISPLAY IRT ON/OFF MUTE 15 33 32 31 30 29 OK 14 Battery Installation 9 VOLUME MENU SETUP 28 16 Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down.
* Function control is available on the unit and the remote control. ** Function not available in this model. 1. POWER Button* Press this button to turn the unit ON and OFF. 2. MONITOR SELECT M1 Button – Sets the remote control code to allow control of the unit set to M1 mode only. M2 Button – Invalid function for this model 3. TV Mode Select Button** Switches certain function keys on the remote control for TV functions. 4.
9. FMM ON / OFF Button* Turns the wireless FM Modulator on or off. 10. CHANNEL SELECT Button* Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz) 11. RETURN Button Press Return Once : Go to disc menu. Press Return Twice : Go to movies playback. 12.
17. AUDIO Button Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes. Note: The languages for audio vary from disc to disc. 18. SUBTITLE Button Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes. Note: The type and number of languages for subtitle vary from disc to disc. 19. STOP (<) Button* Press to stop playback. 20.
26. A-B Button Allows user to repeat the playback from point A to point B. Press A-B button On-Screen DisplayDVD player Repeat AMark the beginning of the section to repeat (Set point A) Once Repeat AB Mark the end of the section to repeat (Set point B) Twice Cancel the A-B repeat function 3 times AB Off 27. ZOOM Button Press this button to enlarge the picture when playing a DVD disc.
31. DAY / NIGHT Mode Button** This control toggles the unit between “Day” and “Night” LCD illumination modes. In the “Day” mode, the LCD backlit intensity is at maximum. In “Night” mode, the LCD backlit is dimmed to a preset level that is more suitable for low light operation. 32. PIX Button (Picture Select)* Each time this button is pressed, the on screen picture adjustment displays the “adjustment bar” for BRIGHTNESS, CONTRAST, COLOR, TINT or RESET.
MENU ADJUSTMENT The System Menu Contains features and options that let you customize your system to change the screen mode display, OSD language and source default. 1) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen. 2) Use the cursor buttons p or q to select the desired item in the main page and press the OK button to select. 3) The sub menu will appear on screen.
OSD LANGUAGE This allows the user to select the language for the on-screen display. The user can either select English, Spanish, French or German for the OSD language. SYSTEM MENU SCREEN MODE OSD LANGUAGE SOURCE DEFAULT DVD OSD LANGUAGE ENGLISH SPANISH FRENCH GERMAN SOURCE DEFAULT DVD This allows the user to select from: DVD default on- Whenever the unit is turned on it will return to DVD mode. DVD default off- Whenever the unit is turned on it will return to the last source selected.
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the onscreen display or prevent DVD playback for children. Using the Setup Menu 1. Press the SETUP button on the remote. The Setup Menu appears on the screen as shown per diagram. Language Video Language Setup Language OSD Language : English Video Setup Video Subtitle : Off Rating Audio : English Rating Rating Setup Misc Misc Setup Misc 2.
LANGUAGE SETUP Language OSD Language Video Subtitle Language for On-Screen Display Rating Audio OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display. The user can either select English, French, Spanish, German or Italian for the OSD language. Misc SUBTITLE SETUP English French Spanish German Italian Language OSD Language Video Subtitle Rating Audio English French select "SUBTITLE" using pq button, then press u button to enter the Submenu.
TV Type The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected. NTSC - Select this type for NTSC TV PAL - Select this type for PAL TV Multi - Select this type for multi-system TV RATING SETUP Rating This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. G Language Parental : 6.
Language Load Factory Load Factory allows you to reset all options to factory settings. * This function will not affect the Rating control settings. Load Factory Load Factory Video Screen Saver Yes No Rating Misc Screen Saver ON -Screen saver will appear OFF -Screen saver will not appear Language Video Note: The DVD player will enable the Screen Saver mode if the unit is inactive for approximately 3 minutes. Rating Load Factory Screen Saver Off On Misc Playing DVDs 1.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed.
Flat Mode: play the entire disc 1/12 This mode is always on (default). During the Flat Mode all the data folders with MP3, JPEG & movies will be played in sequence. If the Flat Mode function is off, it will only play the selected folder; other folders are disabled. / TRACK01 TRACK02 Flat Mode Repeat : Off Mode Normal : TRACK03 TRACK04 TRACK05 Music Playing TRACK06 Repeat: play repetitively 1/12 Repeat function has 4 options: Off, Single, Folder, All.
Edit Mode Program View Add to Program 1/12 / TRACK01 Notice: Edit Mode/Program View/Add to program functions are all related and can not be implemented during play mode or any other program function. Edit Mode TRACK02 Program View TRACK03 Add to Program TRACK04 TRACK05 Music Playing TRACK06 Album:------------ Method: Make sure disc playback is off. Move cursor to Edit Mode function and press OK. After Edit Mode is selected, open the folder and select the songs which will be compiled.
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and DVDs are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION”. Types of Discs your DVD will play •DVD* disc - DVD discs which contain video.
TURNING THE UNIT ON OR OFF 1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will illuminate the controls. 3.
ACCESSORIES WIRELESS HEADPHONES The MMD11 includes a built-in infrared transmitter for use with wireless headphones (purchased separately). The headphone volume is adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless headphones.
TROUBLESHOOTING SOLUTION PROBLEM IR remote inoperative — Verify that the batteries in the remote are fresh. — Verify that the remote sensor eye is not obstructed. Disc won't play — Insert a disc with the label side facing up. — Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs and MP3s. — Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. This DVD player is set to Region Number 1.
SOLUTION PROBLEM Not allowed at the moment — The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number that is out of range. Picture is distorted — The disc might be damaged. Try another disc. — It is normal for some distortion to appear during forward or reverse scan.
REPLACEMENT PARTS Remote Control SPECIFICATIONS 136-4196 LCD Backlighting Edge Light Tube Resolution 800 x RGB x 480 Pixels 1, 152, 000 Operation Temperature 32 ~131º F (0 ~ 55º C) Storage Temperature -4 ~ 158º F (-20 ~ 70º C) Backlit life 15,000 Hours Video Display System NTSC / PAL Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimension LxWxH 14.0” x 12.0” x 2.0” 356mm x 305mm x 60mm Specifications subject to change without notice.
12 MONTH LIMITED WARRANTY Applies to Movies To Go Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2007 Audiovox Electronics Corp.
