Installation manual
Step3
Start your car and turn on your unit
to
confirm that the
XM
Direct system
is
properly connected. When you tune
to
XM
channell,
you should
see
"XM Preview" on your head unit
LCD,
and hear that channel through your
car speakers. If not, check
to
make sure all connections
are
correct or refer
to
the troubleshooting section
of
this installation guide.
Step 4
Mount and secure the
PIA
in a suitable location that will not interfere with
the radio and will not vibrate or rattle after installation.
StepS
Return the car stereo head unit back
to
its original location
in
the dash
board,
be
careful with cables
that
you just installed
so
that they do
not
unplug or get kinked by the head unit.
Note: If you had removed screws
to
pull the
car
stereo head unit
out
please screw those back in.
Step6
If you had removed the dash board during installation please return
it
back
to
its original location.