User Guide

-21-
-23-
REMOTE INFRARED SENSOR/REPEATER
The LCM1502TV incorporates a Infrared Sensor which
relays the signals from the Remote Control to allow the
LCM1502TV to be controlled simply by pointing it’s
Remote Control at the remote sensor. This provides
control of auxiliary equipment such as an Flexvision
VCP or DVD Player. The Remote Infrared Sensor can
relay signals from most manufacturers Remote Control
to its respective component connected to the Video 1
and 2 inputs. In this case you must use the Remote
Control supplied with the other manufacturers
component.
Remote Infrared Sensor
OPERATION
OVERHEAD DOME LIGHTS
A three-position slide switch controls the Dome
Lights on the LCM1502TV. Sliding the switch to the
ON position will turn the Dome Lights ON. The OFF
position will prevent the Dome Lights from turning
ON at all times and the auto position will allow the
Dome Lights to turn ON and OFF with the vehicle’s
interior lighting. Do not leave the vehicle unattended
with the Dome Lights switch in the ON position, as
this could result in a discharged battery.