JMD200 AM/FM/CD AUDIO SYSTEM Installation and Operation Manual INT PUSH POWER
JMD200 CONTENTS System Features ................................................................................................. 1 Safety Information .............................................................................................. 2 Installation ........................................................................................................... 3 Basic Operation .................................................................................................. 6 Tuner Operation ........
JMD200 SYSTEM FEATURES Features of the Jensen JMD200 mobile audio system include: • • • • • AM/FM Tuner with 30 Presets (12 AM, 18 FM) Single In-Dash CD Player Mute Electronic Bass, Treble, Balance and Fader Controls Clock Content List • • • • Jensen Main Chassis Hardware Kit Wiring Harnesses (4-pin and 9-pin) Installation Manual Hardware Kit 1 AMP FLANGE NUTS 10 AMP DIN SLEEVE REMOVAL TOOL MOUNTING SCREW MOUNTING STRAP MOUNTING BUSHING 1
JMD200 SAFETY INFORMATION When Driving Disc Maintenance Keep the volume level Iow enough to be aware of the road and traffic conditions. • When Washing your Vehicle Do not expose the product to water or excessive moisture. Moisture can cause electrical shorts, fire or other damage. A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe the disc using a clean cloth, working from the center hole towards the outside edge.
JMD200 INSTALLATION Before You Begin 1. 2. to a secure part of the dashboard, either above or below the radio using the screw and flange nut provided. Bend the strap to position it as necessary. Disconnect Battery Before you begin, always disconnect the battery negative terminal.
JMD200 Wiring Diagram 4
JMD200 Reconnecting the Battery When wiring is complete, reconnect the battery negative terminal. Removing the Unit To remove the radio after installation, insert the removal keys straight back until they click, and then pull the radio out. If removal keys are inserted at an angle, they will not lock properly to release the unit.
JMD200 BASIC OPERATION NOTE: CD mode will be skipped if no CD is inserted. Reset Use a ball point pen or thin metal object to press the RESET button (11). The reset button should be activated for the following reasons: LOUD • • • INT initial installation of the unit when all wiring is completed function buttons do not operate error symbol on the display Audio Menu PUSH POWER With the radio on, press the SEL button/rotary encoder (1) on the control panel to access the audio menu.
JMD200 Time/Frequency Display Selector (T/F) Displaying the Clock Press the T/F button (10) to display the time of the incorporated quartz clock for 5 seconds. Setting the Clock 1. To set the clock, first turn the vehicle ignition and radio on. 2. Press and hold the T/F button (10). 3. Press the TUNE/TRK |<< and >>| buttons (4) to adjust the hours. “AM” or “PM” will appear on the display to indicate AM or PM. 4.
JMD200 TUNER OPERATION Select a Band Automatically Store / Preset Scan (A/PS) Press the BND button (3) to change between three FM bands and two AM bands. • • During FM operation, when the station is broadcasting in stereo, the stereo icon ( appears on the display. During AM operation, no indications are displayed. Automatically Store Select an AM or FM band. Press and hold the A/PS button (5) for more than 2 seconds to automatically select six strong stations and store them in the current band.
JMD200 CD PLAYER OPERATION Inserting and Ejecting a Disc Controlling Disc Playback Insert a disc, label-side up, into the disc slot (7). The unit will automatically draw the disc in and play the first track on the disc, whether the power was turned on or not. Selecting Tracks Press the eject operation. Press the TUNE/TRK >>| or |<< button (4) to advance to the next track on the disc. The selected track number will appear on the display. button (9) to stop disc play and eject the disc.
JMD200 CARE AND MAINTENANCE • • • TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
JMD200 SPECIFICATIONS CD Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 55 dB Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : More than 50 dB Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : 20 Hz - 20 kHz FM Radio Frequency Coverage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.
ASA Electronics Corporation www.asaelectronics.com © 2007 ASA Electronics Corporation v.
