HR7DD PKG Two 7" Monitors with Built-in DVD Player and Audio/Video Input Capability Mounted in Vehicle Specific Headrests P OW E R P OW E R S CRE E N M O DE S CRE E N M O DE P LAY S TO P S OUR CE S OUR CE AUX AUX Operation Manual
IMPORTANT An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in ‘park’ or when the vehicle’s parking brake is applied.
HR7DD PKG system The HR7DD PKG system is composed of two headrest units. The master unit 1 and master unit 2 has a built-in DVD player each and able to watch the DVD movie that is playing in the master unit or play a video game plugged into the AUX input. The other unit was able to watch the movie or play a video game that was selected by master unit 1 at the AV1 source.
Controls on Master Monitor and Master Remote Control Unit Master Monitor Panel Controls Figure 1. 12 Universal Remote Control Unit 11 Figure 2. M1 1 M2 40 39 2 38 3 4 + POWER SCREEN MODE PLAY STOP SOURCE AUX 37 36 35 5 6 7 8 9 M1 34 33 32 31 30 29 28 27 26 25 10 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 19 20 21 22 10 1. Remote Control Sensor (IR) 2. Power ON/OFF Button 3. Screen Mode Button 4. Infrared Audio Transmitter 5. Play Button 6. Stop Button 7. Source Button 8.
Universal Remote Control Operation (Figure 2) * Function control is available on the unit and remote control. ** Function control disable to use for this model. 1. POWER Button* – Press this button to turn the HR7DD PKG on. Press the button again to turn the HR7DD PKG off. 2. SOURCE Button* – Video signals from video equipment connected to the audio / video inputs can be displayed on the monitor by pressing this button.
15. DISPLAY Button – Press to display DVD Disc current information.
26. ANGLE Button – Press this button to display and select the camera angles. Each time the button is pressed, the angle will change. NOTE: The number of angles vary from disc to disc. 27. SUBTITLE Button – Press this button to display and select the subtitle language in DVD. Each time the button is pressed, the subtitle language changes. NOTE: The type & number of languages for subtitles vary from disc to disc. 28. FM TRANSMITTER SELECT Button – Selects the FM modulator Frequency (Frequency 1: 88.
39. Monitor Select : M1 – Change the universal Remote Control code to enable the control of master unit 1. Control for master unit 2 will be disable. 40. Monitor Select : M2 – Change the universal Remote Control code to enable the control of master unit 2. Control for master unit 1 will be disable. Note: – Please press DVD Mode Select Button to access the DVD function button. – Some of button may no function due to these button are not avaiable for HR7DD PKG.
DVD Settings and Adjustments This chapter describes how to set and adjust various DVD functions using the on-screen SETUP menu. Using the Setup Menu The Setup Display is used for the initial setup, select the DVD playback screen rating, and set the various outputs. You can also set a language for the on-screen display and the setup display and limit playback by children. 1) Press the SETUP button to display the “setup menu” on the display screen. 2) Select the menu item you want using the cursor ( button.
Settings for Parental (Parental Control) This section of the SETUP Menu allows the user to select a rating limit* from G to NO_PARENTAL. The Parental Control function allows you to limit viewing to your preference. buttons to select from: 1. Press and use the G (Children) PG PG 13 R NC-17 ADULT (Adult) NO_PARENTAL * NOTE: Not all discs contain the lockout feature. 2. Press the Enter button to confirm the selection. 3. Input a 4 digit password in using the numeric buttons then press the Enter button.
Playing Audio CDs When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current track and the amount of the time for the track playing. The total amount of time on the disc and the current time running on the disc. Press the DISPLAY button on the remote to change the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. Press DISPLAY 1x SINGLE ELAPSED appears along with the current track playing and the time of that track.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. Press the DISPLAY button on the remote to DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. Press DISPLAY 1x TIME ELAPSED appears along with the amount of time the song has played.
Selecting a Play Mode You can choose the order that the songs will play on a disc temporarily. The FOLDER play mode is the default. To access the play mode options, press STOP if the disc is playing. Press the right arrow button until the PLAY MODE option is highlighted. Use the up or down arrow to choose an option. The play mode options are: • SINGLE: Play a selected song. • REP_ONE: Repeats the song that is playing. • FOLDER: Plays the folder in the order the songs were recorded.
Troubleshooting SOLUTION PROBLEM Poor in vehicle radio reception (FM modulator installed) • Check the condition of the vehicle’s radio antenna. • Verify that the antenna is fully raised. • Verify that it that the FM Modulator is turned OFF by using the remote. IR sensor inoperative • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled.
CAUTION 1. 2. 3. 4. Keep the monitor clean and dry. Always seek qualified personnel to perform repairs. Never attempt your own repairs. Do not drop the monitor or expose to strong impacts. Do not expose to direct sunlight for extended periods of time. MONITOR SPECIFICATIONS 1. Type : TFT Active Matrix LCD 2. Resolution: 1440 (W) x 234 (H) 3. Pixels: 336,960 4. Back Light : Cold Cathode Fluorescent Lamp 5. Power Source : +12 VDC 6. Power Consumption : 30W For 2 Monitors + 1 DVD 7.
12 MONTH LIMITED WARRANTY AppliestoAudiovoxMobileVideoProducts AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © Copyright 2004 Audiovox Electronics Corp. 150 Marcus Blvd.
