HR7011PKG Two Custom Vehicle Headrests with 7” LCD Monitors Touch Screen Control and Built-in DVD Player for Rear Entertainment AUX AUX OPERATION MANUAL 128-8938
IMPORTANT An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
HR7011PKG The HR7011PKG contains two vehicle specific headrests. Each has a 7” Monitor with touch screen controls and a built-in DVD Player. This system allows the users to either watch individual DVDs or watch the same DVD on both monitors. Both users can also share each other’s program. The full function remote control can operate either unit by selecting M1 or M2 on the remote. Quick Start Guide 1. 2. 3. 4. Turn on the M1 Monitor.
HR7011PKG SYSTEM OVERVIEW 1) The HR7011PKG SYSTEM is a versatile headrest system. The headrests are referred to as M1 and M2 in this manual. 2) The M1 Monitor is comprised of a 7" Touch Screen TFT LCD monitor with a built-in DVD player that allows the user to select from several sources (DVD, USB, M2, AV, AUX, MEDIA, and GAME Source). The M1 monitor has a built-in infrared audio transmitter channel (CH A) for use with the twochannel wireless headphones (CH A).
9) Press and release the screen at the top of the screen to release the screen for disc insertion. The headrest itself can be tilted forward to help achieve a comfortable viewing position. Pressing it again will lock the screen back in the closed position. PUSH IN Inner Ring Hook Shaft Angle AUX Closed Position USB JACK PULL UP WIRED HEADPHONE 10) Insert/Eject disc.
HR7011PKG Touch Screen The touch screen allows the user to start DVD play by touching PLAY MOVIE or any of the DVD menu features on the LCD screen. Some DVDs will not allow this function. One method is to use the remote control instead of the touch screen. The other method is to touch any of four corners of the screen to access the DVD menu navigation screen (see below). Use the up/down/left/right icons to select an item from the DVD menu. Use the Enter / 6 to start DVD play.
CONTROLS AND INDICATORS DIAGRAM Control Function Description for M1 and M2 Monitor 1 M1/M2 Panel Control 2 1. 2. 3. 4. 5. 6. 7. 8. 9.
Touch Screen For HR7011PKG Main Page Turn on the unit by pressing the power button located on the lower left of the unit. 1) Touch the panel then touch the Home icon to display the Main Menu. The Main Menu can also be accessed by pressing the MENU button on the unit’s front panel. 2) The Main Menu screens for M1 and M2 contain the following icons: M1 Unit DVD, USB, M2, AV, AUX, MEDIA, GAME, PIX, SCREEN OFF, MUTE, FMM. DVD Touch the Main Menu DVD icon to set the source to DVD.
MUTE Touch the Main Menu MUTE icon to toggle the unit’s audio between on and off. PIX Touch the Main Menu PIX icon to gain access to the display’s picture controls. The controls available are BRIGHTNESS, CONTRAST, COLOR, TINT, and RESET. SCREEN OFF Touch the Main Menu SCREEN OFF icon and the screen will shut off. Touch the screen again to turn it back on. The screen will turn back on after cycling power.
REMOTE CONTROL WITH WIRELESS GAME CONTROL OPERATION 2. Use the SELECT button (page up & page down) to display the games (1-32). Then use the direction buttons to move the arrow to the desired game. Press START to select the game. 3. A Key : “A Function Key” activates the jump and optional weapons. 4. B Key : “ B Function Key” activates Bullet fire and attack. 5. TA Key : TURBO “A” Function Key. 6. TB Key : TURBO “B” Function Key. 7. Press START to begin the game.
* REMOTE CONTROL FUNCTIONAL DESCRIPTION Function control is available on the unit and the remote control. 1. POWER ( ) Button* Press this button to turn the unit ON and OFF. 2. 1 2 3 4 5 37 36 3. TV Mode Select Button This function is not available in this model. Note: Pressing the TV button will disable the DVD and USB functions. To regain control of these functions, press the DVD button. 34 33 32 4.
7. AUTO MEMORY Button (AUTO PROGRAM Button) This function is not available in this model. 8. SKIP / SEARCH Button This function is not available in this model. 9. ERASE / WRITE Button This function is not available in this model. 10. DISPLAY Press to display current disc information while the disc is playing. Press cursor (pq) buttons to select the Title or Chapter. For Title/Chapter selection, use the numeric buttons to enter the desired Title/Chapter selection. 11.
15. AUDIO Button Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes. Note: The audio languages vary from disc to disc. 16. MENU Button Pressing the MENU button in DVD mode will cause the DVD root menu to be displayed. When using a USB device, pressing the MENU button will cause the root menu to be displayed. Pressing the MENU button while listening to MP3 files has no effect. The operation is prohibited.
23. SCAN FORWARD (8) Button* Press to search in the forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed. 24. NEXT (:) Button* Press to skip to the next chapter or track. 25. OK Button (ENTER)* Used to implement a selected setting or menu option. 26. CURSOR (pqt u)* Use these buttons to navigate the menu selection on the screen. 27.
30. IRT ON/OFF Button Turn the Infrared Transmitter ON or OFF for IR Wireless Headphones. Pressing M1 then IRT ON/OFF will control the IR Transmitter for M1. Pressing M2 then IRT ON/OFF will control the IR Transmitter for M2. 31. MUTE Button* Press this button to mute all the audio. Pressing the button again restores the sound to the previously set level. 32. DAY / NIGHT Mode Button This function is not available in this model. 33.
SETTINGS AND ADJUSTMENTS The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the onscreen display or control DVD playback content for children. You can use the remote control or the touch screen to navigate the Setup Menu. Using the DVD Setup Menu The Setup Menu can be accessed using either the remote control or the touch screen. To access the Setup Menu using the touch screen you must have a DVD in the unit and be in DVD Mode.
Subtitle Setup Language Select "SUBTITLE" using the pq button, then press the u button to enter the submenu. Select the subtitle language you desire using the pq button, then press OK / to confirm the setting. Press the t button to return.
RATING SETUP Parental Control This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. 1. G 2. PG 3. PG – 13 4. R 5. NC – 17 6. Adult The rating level can only be changed when the correct password is provided. For first time use to change the parental control, use the cursor u button to enter parental mode. Press OK / and key in the default password (3308) and press OK / .
MISC SETUP Select "MISC” using the pq button, then press the u button to enter the Misc menu. Select the option you want to change using the pq button, then press OK / . Language Use Default Settings This option allows you to reset all options to default settings. Note: This function will not affect the Rating control settings. Screen Saver This option allows you to set the Screen Saver mode.
Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be displayed.
Repeat 1/15 The Repeat function has 4 options: Off, Single, Folder, and All. Move the cursor to the Repeat function and press OK / . Each time OK / is pressed the unit will cycle through the available options. Off/Single/Folder/All are displayed in that order. The Repeat default is Off.
Program Mode Add Set the “Select Mode“ to ON. Select the desired songs from the song list on the left side of the screen. A check mark will appear next to the song. Touch “Program Mode” and select “Add”. Touch “Program” to view the play list. Press “Play” to hear the play list. 1/15 00:00:59 Filter Track 001 Track 002 Track 003 Mode Track 004 Track 005 Track 006 Program The selected songs that are added into a new play list will be displayed.
DVD BASICS To get the optimum use out of the DVD player, make sure you read this section completely. Types of Discs your DVD Player will play • DVD* disc - DVD discs that contain video. • Audio disc - Audio CDs that contain musical or sound content only. • MP3 disc - A disc that contains audio files (for example, a CD-R with downloaded MP3 files). * This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback cannot be guaranteed.
DVD Region Code The DVD player is preset to a region code at the factory depending on where the DVD player is sold. DVDs from a different region cannot be played in this unit and the unit will display "WRONG REGION”. Region 1- USA, Canada Region 2- Japan, Europe, South Africa, Middle East, Greenland 24 Region 3- S.
TROUBLESHOOTING SOLUTION PROBLEM IR sensor inoperative Verify that the batteries in the remote control are fresh. Verify that the remote sensor eye is not obstructed. Verify that M1 or M2 has been selected correctly. Disc won't play The disc is scratched or damaged. Try another disc. Check the type of disc you put into disc slot. This unit only plays DVDs, audio CDs and MP3s. Both the unit and the disc are coded by region.
TROUBLESHOOTING SOLUTION PROBLEM No sound or distorted sound Make sure your DVD player is connected properly. Make sure all cables are securely inserted into the appropriate jacks. The disc is loaded backwards. Turn the disc around so that the disc is facing towards the driver. OSD Displays “Incorrect Disc Format” The disc is loaded backwards. Turn the disc around so that the disc label is facing towards the driver. Touch screen operation is erratic Re-calibrate the touch screen.
CAUTION 1. Keep the monitor clean and dry. 2. Always seek qualified personnel to perform repairs. Never attempt your own repairs. 3. Do not drop the monitor or expose to strong impacts. 4. Do not expose to direct sunlight for extended periods of time. MONITOR SPECIFICATIONS 1. Type :TFT Active Matrix LCD 7. Operating Temperature : 32°F ~ 125°F (0°C ~ +52°C) 2. Resolution : 1440 (W) x 234 (H) 8. Storage Temperature : -22°F ~ 150°F (-30°C ~ +70°C) 3. Pixels : 336,960 9.
For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2011 Audiovox Electronics Corp.
