GX2400 English I/B Ver. 09020A-1 GX2400 Congratulations on your selection of the GX2400 from Audiovox®. This quality 2.4GHz cordless telephone, like all Audiovox® products, has been designed to give you many years of continuous service and represents the best value for your money. It requires little maintenance and is easy to OWNER’S MANUAL#GX2400 VER. 09020A-1 PAGE: 0 U.S.
GX2400 English I/B ver. 09020A-1 setup and operate. IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 229-1235 between 9:00a.m. & 5:00p.m. Eastern Standard Time, Mon. – Fri.
GX2400 English I/B ver. 09020A-1 (Short & Long) USER’S MANUAL ACCESSORY ORDER FORM SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning.
GX2400 English I/B ver. 09020A-1 adjustments of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinctive change in performance. 13. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14.
GX2400 English I/B ver. 09020A-1 FCC / IC NOTICE This equipment complies with Parts 15 and 68 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference that may cause undesired operation of the device.
GX2400 English I/B ver. 09020A-1 REN value should not exceed 5.0A total: however, contact your local telephone company for the specific number in your area. IC (Industry Canada) This telephone is registered for use in Canada. NOTICE: The REN assigned to this device denotes the number of devices you may connect to the telephone loop which is used by the device to prevent overloading.
GX2400 English I/B ver. 09020A-1 • • • • • Batteries Damage from misuse, neglect, or acts of nature (lightning, floods, power surges, etc.). Products which may have been modified or incorporated into other products. Products purchased and/or operated outside the USA, its territories, or Canada. Products serviced by the owner or a service facility not expressly authorized by Audiovox Communications Corp. • Products purchased more than 12 months from current date.
GX2400 English I/B ver. 09020A-1 8. 9. 10. 11. 12. 13. 14. MUTE Button: Press to temporarily disable the handset microphone. Charge Contacts: Used for charging the handset battery. Microphone: Used for speaking with callers. VOL + (Volume Down) Button: Allows you to decrease the handset volume. VOL - (Volume Up) Button: Allows you to increase the handset volume. Headset Jack: For headset connection with hands free conversation.
GX2400 English I/B ver. 09020A-1 end to the telephone modular jack. (Figure 3) WALL USE: A. WITH A STANDARD AT&T OR GTE MODULAR WALL JACK 1. Install the wall mount bracket at the position as shown in Figure 4. 2. Connect the short telephone line cord to the TEL LINE jack on rear of the base unit. 3. Connect the opposite end of the telephone line cord to the modular wall jack. 4. Align the wall mounting slots with the studs located on the modular wall plate and slide the base down to lock in place.
GX2400 English I/B ver. 09020A-1 (Figure 6) BELT CLIP INSTRUCTION Clamp the belt clip at the back of the handset as shown in Figure 7. Belt Clip (Figure 7) CONNECTING THE HEADSET For hands free conversation, a headset (not included) is connected to the headset jack as shown in Figure 8. The handset receiver and microphone are disabled when the headset is connected. Headset Jack Headset Plug (2.5mm) (Figure 8) Press the TALK button to answer or place a call using the headset.
GX2400 English I/B ver. 09020A-1 9VDC Adapter Jack AC Outlet Plug 9VDC Adapter (Figure 9) HANDSET BATTERY INSTALLATION CAUTION: 1. 2. Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage. Remove the battery compartment cover of the handset. Connect the rechargeable Ni-Cd battery as shown on Figure 10. Handset Battery Compartment Insert the End of the Battery Pack Wire RED Wire BLACK Wire 3. 4.
GX2400 English I/B ver. 09020A-1 NOTE: Default mode is ringer on mode. RING OFF LED indicator is off. 1. Press and hold RING on/off button for about 2 seconds to set ringer off mode. RING OFF LED indicator is on. 2. In ringer off mode, press and hold RING on/off button for about 2 seconds to set ringer on mode. RING OFF LED indicator is off. TELEPHONE OPERATION TO PLACE A CALL 1. Press the TALK button on the handset.
GX2400 English I/B ver. 09020A-1 5. Press a number (0 through 9) where you want to store the phone number. NOTE: You will hear a long beep to confirm that the number was properly stored. 6. Repeat procedures 1 to 5 to store other telephone numbers. B. RECALLING A TELEPHONE NUMBER FROM MEMORY 1. Press the TALK button. 2. Press the MEMO button. 3. Select and press one of the keypad buttons (0 to 9). The stored telephone number will be dialed automatically. C.
GX2400 English I/B ver. 09020A-1 LOW BATTERY WARNING • When the handset battery voltage level is low, the handset will beep every 8 minutes and the handset BATT LOW LED indicator will flash in talk mode. • In standby mode, the handset BATT LOW LED indicator will flash. • Return the handset on the base cradle to charge. PAGING FUNCTION • Press the PAGE button on the base unit. The page tone will be heard on the handset. The handset IN-USE LED indicator will flash indicating the paging period.
GX2400 English I/B ver. 09020A-1 TECHNICAL INFORMATION This cordless phone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. NOISE: Electric pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms.
GX2400 English I/B ver. 09020A-1 Does not charge • • Range is limited • • Interference on reception Excessive static • • • • Check the Ni-Cd battery pack for proper connection inside the battery compartment on the handset. The charging contacts and terminals may need cleaning with an alcohol-dampened swab. Move the base unit so that it is centrally located in your residence or office and make sure that the base unit is not located near appliances. The handset Ni-Cd battery may be weak.
GX2400 English I/B ver. 09020A-1 Distributed Exclusively Worldwide by Audiovox®. GX2400 / 09020A - 1 09020A-1 16 OWNER’S MANUAL#GX2400VER.09020A-1 PAGE: 16 U.S.
