Specifications

TV Function
Basic Operation
Connect the antenna to the antenna jack on the unit’s rear panel.
Connect the power supply cord to the +12VDC input power jack and 120VAC power outlet. If the
player is in standby mode, press the POWER button to turn on the unit’s power.
Press the unit’s SOURCE button to select TV mode.
Press the unit’s remote control ▼, ▲ (direction buttons) or use the number buttons directly, to select
the channel that you wish to view.
It is recommended that you perform the following steps when the device is powered up for the first
time.
Picture Parameter setup
Press the remote control SCREEN SETUP button once to enter the picture setup menu. The
following menu will be displayed:
Use the ▼, ▲ buttons to move cursor to the item you want to set (Bright, Contrast, Saturation, Hue
and Sharpness).
Use the ►, ◄ buttons to select the desired values.
Press the OK button on the remote control to exit the setup menu.
TV System Setup
Press the SCREEN SETUP button twice repeatedly on the remote control to enter the tuning setup
menu, the following menu will be displayed:
TUNING
►CHANNEL 002
AFC OFF
SKIP ON
TV MODE
CABLE
FINE TUNING
►►►
AUTO MEMORY
VHF-L 7%
PICTURE
►BRIGHT 050
CONTRAST 060
SATURATION 070
HUE 050
SHARPNESS 002
- 16 -