5" LCD TV Operating Instr uctions Model No. FP1500 For assistance, please call: 1-800-645-4994 Or visit us at Before connecting, operating or adjusting this product, please read these instructions completely.
Table of Contents Recognizing buttons and controls Start up Page# 01 02 04 05 06 07 08 09 10 11 Important Safety Instructions Safety Cautions Accessories Outdoor Power Remote Top / Front Antenna Connection Control Control Installation Panels Rear Panel Input / Output Connections Remote Control Buttons PC/Video/ Speaker Connections
Page# 12 14 15 16 17 25 28 32 33 34 35 Basic Control Menu Setting List (Diagram) Picture Settings Volume Settings TV Setting / Other Functions PC Setting Troubleshooting Product Dimensions Specifications Wall Maintenance Mounting / Repair
0 0 1 Important Safety Instructions Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BCAK) NO USER-DERVICEABLE PARTS INSIDE PEFER SERVICING TO CLIALIFIED SERVICE PERSONNEL The Lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "DAN GER OUS V OLTAGE" within the product's enclosure that may be of sufficient magnitude to constitude
0 0 Safety Cautions Do not step over or place objects on the electrical cord. Do not over load your electrical outlet. Be sure that the AC plug is disconnected from the outlet before performing any kind of maintenance. When cleaning the TV, do not use liquid chemical cleaners or water sprays. Use a damp cloth to wipe out the dust. For safety reasons, do not touch any part of the TV , electrical cord, TV antenna or cable during bad weather and thunderstorms.
0 0 3 Safety Cautions Safety Cautions Users are advised to read this user's guide before operating the product. Keep product away from other heat sources. Such as heat generating electrical appliances, heaters, gas stoves. Avoid dropping the Remote This LCD TV will break if drop or hit; should such incident occur, please send the product back to manufacturer for immediate repair. Never attempt to repair the TV yourself at any time.
0 0 Accessories 4 Accessories Power Adaptor Power Cord User's Manual Batteries Remote Control VGA Cable
0 0 5 Start UP Start UP Antenna Installation Using a good quality TV antenna accessories is essential to LCD TV reception. of antenna systems on the market: below are connectors and the dif ferent types 1. The 75 system with connonly seen F type round head connectors which requires no tools for easy installation. 2. The 300 system with the flat connectors system.
0 0 Start Up Power Connection 1. Remove power adapter from package. Connect the round end of power adapter to the rear of the LCD TV monitor. Please refer to diagram instructions. 2.Take out the power cord and connect the flat end to the power adapter. 3. Plug the other end of the power cord into the wall outlet and the installation is complete.
0 0 7 Start Up Start Up Remote Control - Put batteries into the remote Remote Operation 1 Aim remote directly at LCD TV monitor for clear signal. 2 Remote range is at approx. within 20 feet with angles of approx. 30 degrees. 3 Do not have obstructions between remote and TV reception. 4 Battery life span is between 6 months to one year depending on usage. Once reception is weak, it is about time to replace batteries.
0 0 Recognizing buttons and controls 1 2 3 4 5 6 7 8 9 10 1 Mute 2 TV / Video / PC 3 Menu 4 Channel selection (Previous) 5 Channel selection (Next) 6 Volume control (Decrease) 7 Volume control (Increase) 8 Power 9 Remote Control Sensor 10 Electric power light indicator Light Indicator: Red - TV off Green - TV on Orange - Standby (AV/TV/PC) Recognizing buttons and controls Top / Front Control Panels 8
0 0 9 Recognizing buttons and controls Recognizing buttons and controls Rear Panel Input / Output Connections Connectors earphone (3.5 ) speakers speakers Input Connectors Input Video Speakers AV1 Composite Stereo / AUDIO Connector AV2 S-Video Stereo / AUDIO Connector AV3 Y,Cb,Cr Stereo / AUDIO Connector PC VGA(15 Pin D-SUB) Stereo /3.
0 1 Recognizing buttons and controls 1 1 POWER 2 TV 3 AV 4 BRIGHTNESS 5 AUDIO 6 MUTE 7 PC 8 MTS 9 SLEEP 10 VOL( +/ - ) 11 CH( 12 CHANNEL SELECT 13 DISPLAY 16 14 SKIP ON/OFF 17 15 ZOOM 16 CLOSED CAPTION 17 RECALL 2 3 6 7 4 5 11 8 9 10 12 13 14 15 / ) Recognizing buttons and controls Remote Control Buttons 0
0 1 1 Recognizing buttons and controls Recognizing buttons and controls PC/Video/Speaker Connections Rear Output Connectors PC VGA Audio out 1 PC Connectors Video 2 DVD/VCR Video Connectors Home Stereo 3.5 3 Speaker Connectors Note 1. Normal TV sounds broadcast via speaker connectors are more impressive to ears. 2. If your sound system does not have "Auxiliary" input connectors, you may select CD or V ideo "Auxiliary" inputs.
0 1 Basic Control PC Control Press Power button once, light indicator changes from red to green. TV monitor is now ON. Press power button again, light indicator changes from green to red. TV monitor is now OFF. Changing between TV/AV/PC Settings 1. Make sure all equipment is connected properly. 2. Press your desired setting (TV/AV/PC) and the selected mode will show on the upper left screen of the monitor indicating your present mode.
0 1 3 Basic Control Basic Control To set sleep mode Switching Channels Use numeric buttons on remote control to select the channel you desire. When selecting Single or Double digits channels (e.g., Channel 8) be sure to complete the selection within 4 seconds. Action 1: Press "0" / Action 2: Press "8" note: always include the digit "0"in front of Single digit channel selections. ( e.g., Channel "8" is selected by pressing "08"). When selecting three digit channels (e.g.
0 1 Menu Setting List (Diagram) Picture Setting Volume Seting TV Setting Other fuction Setting To locate the above settings do the following: 1.Press MENU to display the menu setting list 2.Press VOL (-/+) to select the desired item 3.Press CH( / ) to scroll up or down to decide the selection 4.Press VOL (-/+) to change the setting 5.
0 1 5 Picture Settings Picture Settings Picture Settings (1) Directly Setting the brightness on the remote control, press "BRIGHT" to adjust the desired brightness. You have 3 selections to chose. BRIGHT NORMAL Maximum brightness 60% brightness suitable for viewing in a well lit area and save energy DARK 20% brightness Picture Setting (2) On the remote, press MENU.
0 1 Volume Settings 1.Press "Audio" on the remote the select 5 different preset levels of volume. 2.Press "Audio "button; the 5 different levels of sounds will appear as shown. - Standard: High and low are equal - High low pitched - Low pitched - High pitched - Low high pitched Volume Setting (2) 1.You can adjust the "Balance" of the speakers. 2.
0 1 7 TV Setting TV Setting Multichannel Television Sound (MTS) Your TV set is equipped with MTS (Multichannel Television Sound) decoding. This means you can view your programs in the original sound track. (SAP, Second Audio Program). 1.Simply press the "MTS" button to adjust the desired language heard. 2.You may also select "MENU" to do the necessary adjustments step by step. Simply press the select 1.Stereo 2.Mts 3.Mono and setting buttons to finalize your selection. 3.
0 1 TV Setting This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. Restriction of TV programs includes two rating that contain information about the program : the MPAA rating and the TV Parental Guidelines. The MPAA is restricted by age. TV Parental Guidelines are restricted by age and contect.
0 1 9 TV Setting TV Setting TV PARENTAL GUIDELINES RATING TV-Y (All children) TV-Y7 (Direct to Older Children) TV-G (General Audience) age TV-PG (Parental Guidance base Cautioned) TV-14 (Parents its Strongly Cautioned) TV-MA (Mature Audience Only) content FV V S L D (Fantasy (Violence) (iexual (Adult (Sexually violence) S Uation) Language) Suggastive Dialog X X X X X X X X X X X X X X X X X X X X X X X X X X X : The content rating can be set, but this rating is not normally broadcast by 1
0 2 TV Setting CHANNEL INPUT (CATV/TV) It is necessary to set the receiving mode to CATV or TV channels to receive local broadcast TV programs 1. Press MENU to display MENU screen 2. Press VOL (-/+) to CH 3. Press CH ( / ) to move the cursor to CHANNEL INPUT 4. Press VOL (-/+) to select CATV or TV 5. Press MENU to exit CHANNEL AUT O SCAN From MENU, press VOL(-/+), then CH ( / ) to find CHANNEL AUTO SCAN press VOL(-/+), channels will automatically select, adjust and set.
0 2 1 TV Setting TV Setting Channel Memory (Enable/Disable) CHANNEL MEMORY (Disable Channel) If you do not want a particular channel, you can delete it from memory as follows: 1. From your remote, press "CH"( / ) up or down to find the channel you wish to delete. You may also directly input the channel you wish to delete. 2. Press "SKIP ON/OFF" to delete the channel you wish. This action will delete the channnel from your TV. The deleted channel lettering will also change color from green to red.
0 2 TV Setting 2 TV Setting Sleep Mode 1. To set sleep mode : Press the "Sleep" button and select the time you wish to activate this function. The selected time (lettering in red) will disappear from your screen, and your power indicator will now change from the color green to that of orange, indicating that the sleep mode is now active. 2. To cancel sleep mode: Press "Sleep" button and the remaining time till sleep mode activation will appear (lettering in green).
0 2 3 TV Setting TV Setting Backlight Setting From the menu, press VOL (-/+) , then CH ( / ) and find "backlight" mode for desired setting. Blue Channel Setting Automatically turns the screen blue if a broadcast signal is not received. Note: When received signals are weak or interferedwith some other signals, the BLUE SCREENfunction may be activated. To watch the TV under such conditions,set BLUE SCREEN to off.
0 2 Other Functions Press the mute button to silence the TV volume. The screen will show a red icon on the TV screen indicating that the mute function has been activated. Press the mute button again return to the original volume setting. Note: Increasing or decreasing the volume setting will also disable on mute setting. Channel Display Press the "Display" button and the top right hand corner of the TV screen will display your current viewing channel, program and audio mode.
0 2 5 PC Setting PC Setting PC Settings Simply press TV/Video/PC button to locate the PC mode. To make adjustments under the PC mode, do the following: 1. Press the "MENU"button 2. Select the function you desire 3. Press the "CH" up or down buttons to adjust or the "VOL+/-" button for further adjustments. 4. To demostrate the "water level" , move the light pointer to the "water level" position and the letterings will be lit. 5. Press "VOL +/-" to adjust the screen left and right balance. 6.
0 2 PC Setting Press menu, select brightness, and then set the brightness functions Contrast Press menu, select Contrast, and then set the contrast functions Horizontal Position Press menu, select horizontal Position , and then set the horizontal position functions Vertical Position Press menu, select Vertical Position and then set the vertical position functions PC Setting Brightness 6
0 2 7 PC Setting PC Setting Phase Press menu, select Phase, then set the phase functions Note: Adjust if screen is not clear Clock Press menu, select Clock, then set your current time Load Default Press menu, select, then set the setting to default note: if screen shows "No Signals" this means that the PC(VGA) signals has not yet been connected.
0 2 Troubleshooting Please note the following common TV reception interferences: Ignition effect Black spots or vertical lines may appear. Screen jumps crazily or is very unstable. This is commonly the result of car ignition system interference, neon lights, or other forms of electrical interferences.
0 2 9 Troubleshooting Troubleshooting You may have problems that can be fixed with a few minor adjustments. Look for the type of problem you are having below and then apply the suggestions to get your TV going again. Picture with no sound Check if you have accidentally pressed the "mute" button Check other channels if the same problem exist. If other channels are fine, then problem is with the TV program you are viewing.
0 0 3 2 9 Troubleshooting Check your brightness level Check your contrast level In the on screen display (OSD) select default Check your LCD monitor for possible demage Remote Control Failure Check TV main power source Check if remote control batteries are weak Check if batteries have been correctly installed Check if there are obstructions between your remote control and the main TV remote sensor Disconnect your cable for two minutes before reinstalling it If failure resulted from electrical interfere
0 3 1 Troubleshooting Troubleshooting Before calling our serviceman, please refer to the following chart to see if you can adjust the problems yourself. Trouble TV will not turn on Checks and Adjustments Plug TV in. Plug something else into the outlet to make sure it is working. Make sure batteries in the remote are not dead. Make sure batteries are placed in the remote the right way. Unplug TV for a few minutes and then turn it on again.
0 3 Product Specifications Screen 15" (diagonal) Aspect Ratio 4:3 Resolution 1024x768 Pixel Pitch 0.297mm(H)x0.297(V) Total Display colors 16.7 millions(8 bit/color) Viewing Angle H: 130 V:110 Contrast Ration 500:1 Brightness 350 cd/m2 (typ) Backlight lift 50,000 hrs ( minimum) Surface Treatments: Anit-Glare Connection information: Hi-Resolution component /Video (480i) S-Video Composite (A/V input) VGA (15 pin D-sub) 3.
0 3 3 Dimensions Dimensions Unit: inch 3.92 inch(99.7 mm) 19.13 inch (486mm) 1.24 inch(31.7 mm) 12.00 inch (305 mm) 13.54 inch (344 mm) 6.08 inch (154.
0 3 Wall Mounting 3.93 inch (100 mm) 3.93 inch (100 mm) VESA 3.93 x 3.
0 3 5 Maintenance / Repair Maintenance / Repair Maintenance: DO NOT wipe LCD with water Clean the LCD using a dry soft cloth such as gauze. If the LCD is heavily soiled, appy a cleaner for LCD panels to the cloth and wipe off gently. DO NOT use chemical such as acetone,solvents as xylem or toluene.
Note
Note
Note
Note Customer Record: This Model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and Warranty Service purpose.
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product ( at the Company's option) without charge for parts and repair labor.
Dealer 70-010019
