SAFETY PRECAUTION WARNING WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 6A. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions - All operating and use instructions should be followed.
TYPES OF DISCS THAT CAN BE PLAYED ON YOUR UNIT The Unit can playback discs bearing any of the following marks: Audio CDs [8cm(3")/12cm(5”) disc] DVDs [8cm(3")/12cm(5”) disc] Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is recorded on DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc.
IDENTIFICATION OF CONTROLS Front Panel 1) Disc tray Place disc in open tray. Open tray by pushing OPEN/CLOSE button. 2) Remote sensor Accepts the remote control signals. 3) Power indicator When the Unit is turned on by pressing the I / button, the light will illuminate. 4) Display window Displays system information. 5) VOLUME control Adjust the VOLUME level. 6) I / button Turns the power on and off. SKIP button 7) Press to go back to previous chapters/ tracks.
CONNECTING TO A TV Connecting to a TV Use the VIDEO/AUDIO/S-VIDEO cable to connect your TV to the Unit. To VIDEO OUT (yellow) (red) To AUDIO OUT (white) To wall outlet To VIDEO IN To S VIDEO OUT To AUDIO IN (yellow) (white)(red) To S video input S video cable (not supplied) If the TV has S video input, connect the Unit with an S video cable. When using an S video cable, do not connect the yellow video cable.
CONNECTING TO AN AUDIO SYSTEM AND OTHER EQUIPMENT LISTENING TO AN AUDIO SYSTEM Use the coaxial cable (not supplied) to connect the DIGITAL AUDIO OUT jack and the amplifier equipment's AUDIO INPUT jack.
ANTENNA CONNECTION For better reception FM Connect FM antenna to the FM ANTENNA jacks. AM(MW) Connect the loop antenna (supplied) to the AM(MW) LOOP ANTENNA terminals.
SPEAKER CONNECTIONS Surround Speakers Connections Ensure in each case that the TRANSPARENT (+) wire is connected to the (+) terminal of the surround speaker output and the TRANSPARENT (-) wire with black line is connected to the (-) terminal of the surround speaker output. Also ensure that the correct orientation for left and right main speakers is observed.
ADJUSTING THE SOUND To adjust the surround sound balance while Pro Logic decoding is in effect Use the remote control to make the following changes to speaker balance: Notes : • If you do not press any button within a few seconds, the display will return to normal. • Press the VOLUME + control to right side to increase the volume. Press the VOLUME - control to left side to decrease the volume. Front speaker (left) • Press the SOUND button to display LEFT, then press the or the sound level.
DISPLAY WINDOW ANGLE indicator Appears when multiple camera angles are recorded in the section of the DVD that is currently playing. CHAPTER / TRACK indicator When a DVD is loaded in the Unit, this indicator appears along with the chapter number. When a Audio CD is loaded in the Unit, this indicator appears along with the track number. REPEAT playback indicator Displayed during repeat playback. REMAIN TOTAL indicator Indicates the elapsed playback time of the idsc.
REMOTE CONTROL UNIT 1) POWER / button Turns the Unit power on and puts it in standby mode. 2) Number (0 - 9) and (+10) buttons Use when creating programs, and entering a parental level password. To select preset stations over 9, press +10 button and then the second no. for example, to enter 18, press +10 and then 8.
REMOTE CONTROL UNIT (continued) 16) / CURSOR buttons Use to highlight selections on a menu screen and make adjustments of the Unit settings. 17) ENTER button Confirm selections on a menu screen. 18) RETURN button SOUND Return to a previous menu screen on a DVD or return to DVD playback from the DVD menu screen. 19) ENT FCN RETURN SLOW SLOW % & ' 20) 21) PLAY button Start playback. PREV NEXT PRESET PRESET STOP button Stop playback.
LOADING THE BATTERIES USING THE REMOTE CONTROL • Point the Remote Control at the REMOTE SENSOR located on the Unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 16 feet (5 meters). TO INSTALL BATTERIES 1. Open the battery door. 2. Insert two "AA" or UM-3 size batteries.
Basic playback DVD CD PLAYING A DISC BASIC PLAYBACK Preparations • When you want to view a disc, turn on the TV and select the video input connected to the Unit. • When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the Unit. • Adjust the VOLUME or SOUND control to your desired level. (See ADJUSTING THE SOUND) 1. Press the I / Notes : • Use the OPEN / CLOSE button on the front panel to open or close the disc tray.
Basic playback PLAYING A DISC (continued) DVD Fast Forward/Fast Reverse 1. Press the FWD or REV button when a disc is playing. • The disc begins fast scan at x2 speed. • Four speeds are available. Each time FWD fast scan changes in the following sequence: 2. Press the or REV button is pressed, the speed of PLAY button when you reach the desired point. Slow-motion play 1. Press the SLOW or SLOW button in the play mode. • Two speeds are available.
Basic playback PLAYING A DISC (continued) DVD Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. (The recorded angles differ depending on the disc used.) 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the current angle.
Basic playback DVD DVD PLAYBACK FOR SPECIAL FUNCTION About the screen Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE. • While the disc is playing, press the DISP (DISPLAY) button to display the screen shown as below. Elapsed time: Elapsed time from the beginning of the chapter which is playing currently. Remaining time: Remaining time of the title which is playing currently.
Basic playback DVD PLAYBACK FOR SPECIAL FUNCTION (continued) Normally, DVD discs are divided into titles, and the title are sub-divided into chapters. Audio CDs are divided into tracks. You can quickly locate any specific title, chapter or track. DVD Locating a specific title directly If a DVD video disc contains title numbers, you can locate a specifc title by directly selecting a title number. 1. In stop mode, press the GOTO button to search your desired title. 2.
DVD PLAYBACK FOR SPECIAL FUNCTION Basic playback (continued) DVD CD Locating a specific time directly You can locate a specific location by entering its corresponding time (hours, minutes, seconds) 1. Press the GOTO button to search your desired playing point. 2. Press or button to highlight time. DVD CD 3. Press the corresponding number buttons for the setting point you want. • The first two numbers you entered represent hours. • The second two numbers you entered represent minutes.
Advanced playback PLAYING FROM THE DESIRED LOCATION DVD Storing locations in the memory The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed playback. Title / Chapter programmed playback 1. Press the MEMORY button while the disc is stopped. 2. Enter the title numbers in chapter numbers in -- -- . Use or button to move the highlight to chapter and enter the . Chapter Title 3. Use , , or button to move to the other field. 4.
Advanced playback DVD REPEAT PLAYBACK You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) Repeating a title You can play the same title repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ Repeat Title ” indicator displays on the screen. The current title is played repeatedly. Repeating a chapter You can play the same chapter repeatedly. 2.
Advanced playback REPEAT PLAYBACK (continued) CD You can play a single track and whole disc repeatedly. Repeating a single track You can play the same track repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ Repeat Single ” indicator displays on the screen. The current track is played repeatedly. Repeating a whole disc 2.While the disc is playing, press the REPEAT DISC button until the “ Repeat All ” indicator displays on the screen. The whole disc is played repeatedly.
PLAYING A DISC RADIO OPERATION Note: • The left / right front speakers and subwoofer are activated only. TUNING INTO A STATION MANUALLY 1. Press the I / button on the front panel. The indicator lights up. 2. Press the FUNCTION button on the front panel until the frequency band appears on the display. 3. Press the BAND button to select the desired band. TUNING button to tune in the desired station. 4.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS LANGUAGE setting OSD Menu 1. Press the SETUP button. 2. Use or button to select Language, then press the ENTER button. 3. Use or button to select OSD Menu, then press the ENTER button. 4. Use or button to shift and select the language, then press the ENTER button. 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. Subtitle 1. Press the SETUP button. 2.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) Audio 1. Press the SETUP button. 2. Use or button to select Language, then press the ENTER button. 3. Use or button to shift and select the Audio, then press the ENTER button. or button to shift and select the language, then press the ENTER button. 4. Use 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. DVD Menu 1. Press the SETUP button. 2.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) VIDEO setting TV Shape 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER button. 3. Use or button to select TV Shape, then press the ENTER button. 4. Use or button to shift and select the TV type, then press the ENTER button. 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) TV System 1. Press the SETUP button. 2. Use or button to select Video, then press the ENTER button. 3. Use or button to select TV System, then press the ENTER button. 4. Use or button to shift and select the signal, then press the ENTER button. 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. NTSC: for NTSC disc. Connect a NTSC TV. PAL: for PAL disc. Connect a PAL TV.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) AUDIO setting Dolby Digital 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use , , or button to select Dolby Digital, and then press the ENTER button repeatedly to select Analog Out type. 4. Use button to shift and press the ENTER button repeatedly to select the Digital Out type. 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) Others 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use , , or button to select Others, and then press the ENTER button repeatedly to select Analog Out type. 4. Use button to shift and press the ENTER button repeatedly to select the Digital Out type. 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) MORE AUDIO setting Pro Logic 1. Press the SETUP button. 2. Use or button to select More Audio, press the ENTER button. 3. Use or button to select Pro Logic, and then press the ENTER button. 4. Use or button to select the desired setting, and then press the ENTER button. 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) Subwoofer 1. Press the SETUP button. 2. Use or button to select the More Audio, press the ENTER button. or button to Subwoofer, and then press the ENTER button. 3. Use 4. Use or button to select the desired setting, and then press the ENTER button. 5. If you want to exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button. Subwoofer On : Always be switched on the Subwoofer. Off : Always be switched off the Subwoofer.
In stop mode CUSTOMIZING THE FUNCTION SETTINGS (continued) RATING setting Password DVD discs equipped with the password function are rated according to their content. The contents allowed by a parental lock level and the way a DVD disc can be controlled may vary from disc to disc. For example, if the disc allowed you could edit out violent scenes unsuitable for children and replace them with more suitable scenes, or lock out playback of the disc altogether. 1. Press the SETUP button. 2.
LANGUAGE CODE LIST FOR DISC LANGUAGE Code Language Name Code Language Name Code Language Name Code Language Name AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byerlorussian Bulgarian Bihari Bislama Bengali Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French FY GA GB GL G
MAINTENANCE CLEANING DISC • A defective or soiled disc inserted into the Unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth. • NEVER use solvents such as benzine or alcohol to clean the disc.
TROUBLESHOOTING GUIDE (continued) SYMPTOM CAUSE (AND REMEDY) • The location and orientation of the antenna are incorrect. If you using an indoor antenna, change to an outdoor antenna. • The TV antenna wire is too close to the Unit. Separate the antenna wire of the TV set from the Unit. No sound or only a very low-level sound is heard. • Check that the speakers and equipment are connected securely. • Make sure that you've selected the corrected equipment on the system.
SPECIFICATIONS UNIT Power supply Power consumption Signal system Laser Signal-to-noise Audio dynamic range Harmonic distortion Operating temperature Operating humidity AC 120V ~ 60Hz 116 W Standard NTSC Semiconductor laser, wavelength 650/780nm More than 95dB More than 93dB Less than 1% 41°F to 95°F (+5°C to 35°C) 5% to 85% ( no condensation) VIDEO OUTPUT Output level Jack 1 Vp-p (75Ω) RCA/Pin jack AUDIO OUTPUT Output level Jack 1.80 ± 0.
Guidelines of Playing MP3 files This unit will play MP3 files recorded on CD-R and CD-RW discs. Playing a MP3 file disc 1. Press the OPEN /CLOSE button, the disc tray opens. 2. Insert a MP3 file disc on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The unit will take a short while to load the disc and automatically playback. To pause playback • Press the PAUSE button. To resume playback again, press the PLAY Y button.
