Answering Machine User Manual
"Press  #5  to  stop"  Press  #5
during  review  of  messages  to  stop
playback.
"Press  #  4  to  repeat  the
message  II  During  message
review,  press  #4  to  return  to  the
beginning  of  the  message  being
played.  Press  #4  twice  to  return
to  the  previous  message.
Approximately  10  seconds  after
new  messages  are  played  (or  after
the  voice  prompt  says  you  have
"NO  new  messages.  ).  you  will
hear  the  following  menu:
.Press  #2  to  play  all  the
messages"
"Press  #5  to  stop"  !,
"Press#4torepeat  the  message"
"Press  #6  to  skip  the  message"
" Press  #9 to erase  the  message  "
"Press  #1  for  other  functionsH
.HPress  #6  to  skip  the  message"
During  message  review,  press  #6
to  skip  to  the  next  message.
" Press  #9 to  erase  the- message  "
During  message  review,  press  #9
to erase  the  message  being played.
"Press  #7  to  review  outgoing
message"  To  listen  to  your
outgoing  message,  press  #7.
~
-w-
+
" Press  .7  to  record  outgoing
message  "6To  record  a  new
outgoing  message  (  replacing  the
previous  outgoing  message  ). press
.7.  When  your  outgoing  message
is  completed,  hang  up.
Upon  pressing  #1,  you  will  hear  the
advanced  menu:
"Press  #7  to  'review  outgoing
message"
"Press  *7  to  record  outgoing
message"
"Press  *8  to  record  memo"
" Press  #4  twice  to  repeat
previous  message"
"Press  #0  to  turn  the system  ON
or  OFF"
"Press  #1  for  other  functions"
P ressing  #1 at this point  will  return you
to  the  first  menu.
NOTE:  Press  .0  to  exit  remote
operation  mode.  In addition,  the
DT  941 CI  will  exit  remote  opera-
tion  mode  if there  is approximately
15  seconds  of  inactivity.
"Press  .8  to  record  memo'.  To  -
record  a  memo,  press  .8.  When
done,  hang  up.
Review  Of  Remote  Commands
..'Press  #2  to  play  all  the
messages  .,  The  system  will
announce  how  many  new  and  old
messages  are in  memory.  If there
are  any  new  messages,  the  DT
941 CI  will play  the new messages
only.  Once  all  new  messages  are
played.  you  can  press  #2  again  to
REPLAY  all  (old)  messages.
HPress  #0  to  turn  system  on  or
offH  As  you  press  #0,  the  voice
prompt  will  toggle  between
"Answering  Machine  ON"  and
" Answering  Machine  OFF".
39
rF
il
OT94102p65
39
-~
6/24/98. 12:20 PM










