Answering Machine User Manual

BASE UNIT MESSAGE WINDOW

(LED)

.The large Base Unit display provides useful data on the status of your DT

941 CI answering device. Below are examples of the data:

-@-

.(If the DT 941 CI is Or'F when you

call, let the phone ring at least 10

times. The answering device will

turn itself ON, and prompt you to

enter your security code.)

From a remote location, you can

access many of the DT 941CI

answering device functions, such

as listening to messages, recording

a memo, or changing your outgoing

message.

.The factory-set security code is

19. To program a different code,- -

see SETTING UP YOUR DT 941 CI

ANSWERING DEVICE -SET

SECURITY CODE.

To access your DT 941 CI re-

motely, you need to call from a

different phone line, using a touch-

tone phone.

Dial your phone number and wait

for the DT 941 CI to answer.

.Once the security has been

entered, you will hear a beep,

confirming that the DT 941 CI has

entered remote operation.

While the DT 941 CI is play~e

outgoing message, press L!-) ,

then enter your 2-digit security

code.

You will then hear the voice

prompt announce the number of

new (unplayed) messages,

followed by the playback of the

new messages (if any).

I-F

-n

6124/98. 12:20 PM

OT94102.p65